As an Amazon Associate I earn from qualifying purchases.
1. DRELD #ad
Flame Failure Safety Control Valve Kit with 5/8” -18UNF Inlet Outlet Thermocouple Knob Switch, Fire Pit, DRELD Low Pressure LPG Propane Gas Fireplace Fire Pit, Fits for Gas Grill, Heater #adDRELD #ad
- Not oem but fits oem Standards, the quality is equivalent to OEM requirements. Pretty easy to snap into place. At full speed, the safety cutoff kicks in, fire pit, heater, cutting off the gas supply. Flame safety valve need to connect with thermocouple.
Fix the thermocouple nut M8 on the valve end tightly. Fire pit restoration works order for cheap and simple repair. Connect your inlet and outlet hose on inlet and outlet side.
Open gas by correct size knob and push your valve around 5-10s till the thermocouple head is heated enough. Save much money off dealer prices. Connect thermocouple and end thread well. Feature: 600mm thermocouple with m8*1 threaded head.
Note: fix the valve on a plate or board of your grill or fire pit by the head screw and flange. Premium quality: strict quality control standards to build and test. Bakelite knob OD 38mm, D shaft 6. 1mm. If the propane fire pit Kit once failed, simply contact us for a replacement or refund. Release your hand and it work properly If when you release hand, gas valve shut off again, please check.
|Part Number||Thermocouple and Knob Switch|
|Model||Thermocouple and Knob Switch|
2. Aupoko #ad
Aupoko Propane Gas Grill Control Valve Table Top Regulator, Propane Gas Grill Control Valve with M12 0.7mm Nozzle Jet and 1"-20 Female Throwaway Cylinder Thread Inlet and an Orifice Outlet #adAupoko #ad
- 1 year warranty - the propane grill regulator complete with 1- Year limited warranty, please feel free to contact us, should be there any question, our customer service will reply you within 24 hours.
Ip regulator size - inlet size: 1’’-20 unef standard us propane gas grill control valve table top regulator, outlet size: Male M12*1 thread with 07mm nozzle. Wide application - lpg 1 lb adjustable propane gas regulator outlet pressure range: 6 -18 inch W.
C, work on any low pressure appliance with 1/4’’ barb hose connection and 1"-20 Female thread. Easy to install - direct replacement control valve, easy and quick to install to your gas grill and do not need any special tools. Premium quality - this propane tank regulator valve is made of high quality metal material for solid construction and durability to use.
|Part Number||Low Pressure Gas Valve|
3. METER STAR #ad
METER STAR LPG 1 lb Adjustable Propane Gas Regulator Knob Pressure Relief Valve M12x1 Nozzle 0.7 mm #adMETER STAR #ad
- Lpg one pound tank adjustable propane gas Regulator M12x1 With Nozzle 07mm, this is Low-pressure Relief valve. Csa certified / product item:t3 / Outlet pressure: 6"-18" W.
C. Flow capacity: 47600 btu/hr, determine the size of the interface thread before purchasing. Inlet: 1”-20 unef outlet: m 12x1 / low pressure, Note:Please pay attention to the correct installation when replacing, incorrect installation will cause unavailable, need help please contact us.
Please pay attention to the shape and size of the interface. The wrong purchase may not be able to use it. The regulator can connect U. S standard one pound propane tank directly.
4. Hooshing #ad
Hooshing QCC1 Propane Adapter Gas Regulator Valve Fitting with 1/4 Inch NPT Male Pipe Thread #adHooshing #ad
- No other tools required and easy to install. Won't be easily corroded. Made of brass. Size: 1/4" male NPT. May need a wrench or socket to replace or tighten it to the regulator.
Great for bbq, camping stoves, propane heater and other propane appliances. Features long lasting durability. Converts 1/4'' male pipe Thread to QCC1/Type1.
5. Mudder #ad
Mudder 4 Pieces Gas Grill Control Knob Grill Replacement knobs Rotating Switch Gas Stove Gas Cooker Chrome Knob Gas Stove Control Knobs with D Valve Stainless Steel Round Knob for Gas Grill Stove #adMudder #ad
- Easy to install: you just need to install the product corresponding to the D valve position to accomplish installation; And no other tools needed. Size information: designed to fit d-shape grill valve shaft, the insert size is approx.
0354 inch/9 mm in length and 0275 inch/7 mm in width, suitable for most gas grill stove; Note: please make sure the insert size before purchasing.
Wide application: the gas grill control knob can be applied to many applications, ovens and ranges, such as most gas and electric stoves, camping appliances, also suitable for campers, etc.
Package includes: you will receive 4 pieces gas grill control knobs, enough quantity and convenient for your replacement. Durable material: made of quality plastic with shiny chrome plated finish, fit for your stainless steel grill well and can be applied for a long time; Nonslip silicone ring in middle of the control knob, soft and easy to grip.
6. MeTer Star #ad
MeTer Star Propane lpg Gas fire Pit Control Safety Valve Flame Failure Device Cock Gas Heater Valve with thermocouple and knob #adMeTer Star #ad
- Platic black bakelite knob diameter 38mm and "D" Insert for Valve 6. 0-6. 1mm. Suitable for all kinds of low pressure heaters, bbq stove and ovens. Need to push valve first then turn the spindle and hold for few seconds, it cannot stick immediately may need 5-15SecondsPlease contact us if you are missing an acce.
Length of thermocoupler 600mm head tip m8*1 this is low pressure control valve max rating BTU 50000;When installing, make sure that the installation position of each part is accurate, incorrect installation can lead to unusable, especially thermocouples.
Low working pressure max 1/2 psi（65mbar）, ce&csa tested Main Control Valve In & Out with 3/8" Male Flare thread. For more installation details and possible problems, see the detailed description below. This universal valve assembly requires some hands-on capability for DIY replacement, please confirm that you have any questions please contact us.
7. GasSaf #ad
GasSaf Propane Gas Grill Control Valve Table Top Regulator with a 1"-20 Female Throwaway Cylinder Thread Inlet and an Orifice Outlet. #adGasSaf #ad
- Connect table top grill to a 1lb propane cylinder. Adjustable from 7, 000 btu/hr to 12, 000 BTU/hr. Direct replacement control valve for olympian 4100 and 5100 grills 1-20 disposable cylinder connection.
Regulator for backyard Grill, BHG and more Table Top Grill Models. Will work on any low pressure appliance with a burner tube that is M12 x 1. 5 thread.
8. MENSI #ad
Use for Camper or Trailer's Propane Control Supply, MENSI Grill Valve Replacement Part for 57274 Used for Olympian 5500 Grills with 1/4" Quick Disconnect Plug #adMENSI #ad
- Used for using propane supply and flame control for bbq grill with 1/4" Quick connect Plug propane connection. Replacement part for olympian 5100 and 5500 and Weber 200 gas grills as well as other heater or grill with inlet burner thread more than 12mm.
Rated for 14", can control the flame on, 05 psi max of inlet pressure low pressure only non-safety device, off and adjust.
Inlet connect the grill burner tubing with 12mm or more inlet hole, Thread M12x1. 5. The valve can easy connect the 1/4" quick connect adapter to hook the RV or trailer gas supply hose. Include black control knob 1. 75" diameter.
9. YANC #ad
Seal Tape, Heater, YANC Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit with 3/8" Flare Inlet & Outlet, Replacement Parts for Gas Grill, Thermocouple Knob Switch #adYANC #ad
- Design: lp g low working pressure max 1/2 psi（65mbar）, ce&csa tested main control valve in & out with 3/8" male flare thread, valve Spindle "D" Shaft for 6mm Knob and M15 Nut to Fix on your Panel Plate. If the main components of your original fire pits are frozen solid, fire pit, heater, fireplace & Heater.
Fire pit restoration works order for cheap and simple repair. Only suitable for low pressure propane application max BTU rating: 50000 Keep the thermocouple to be heated and push the Valve around 5-10s then Release Hand if Flame stops, Adjust the location of Thermocouple tip.
The thermocouple has length to spare when routing around the main gas burner line. At full speed, rust and corrosion, it is good choice for direct replacement. Please ensure fitment before buying. Material: the fire pit gas control valve kit is made of high quality brass material with heavy-duty construction for durable use.
It works far better than original with more precise control and better range both lower and higher gas flow. Installation: easy to install and perfect to match. Compatibility: the propane lpg gas fire pit control safety valve kit is suitable for low pressure repair control System for gas grill, the safety cutoff kicks in, cutting off the gas supply. It is a flame failure valve and has to work with thermocouple together.