As an Amazon Associate I earn from qualifying purchases.
Laser nozzle has 1 front jet and 3 rear jets. The other end is swivel which releases stress between sewer hose and gun / pressure washer oulet. The 1 front jet at 0°spray angle can clear blockages and 3 rear jets at 33°spray angle can flush out debris loosened by the front jet.
The orifice is 4. 5. Working pressure is rated to 4400 PSI. Burst pressure is rated to 11000 PSI. Sewer jetter hose has a solid end which connects to sewer nozzle. Including sewer jet hose, rotating sewer jetting nozzle, laser sewer jet nozzle button nose, M22 female to 1/4 inch female NPT coupler and 1/4 inch quick connect plug. Cover layer of is made of thermoplastic polyurethane, weather, ozone, able to resist oil, and abrasion.

Work temperature 35°f to 250°f0°c to 121°c, great for all-weather, easy drag, 50% much flexible than the cheap stiff hose, remove the heavy dirty easier and faster. Universal and longetivy fittinghigh grade usa standard 3/8" brass socket and steel plug, 100% production line check and guarantee without leak for your power washer connection.
Real high qualityif you're looking for a hose that could use for 3 to 5 years and even longer, this hose is a good choice for you. Germany engineering upgraded high tensile steel wire braid and germany engineering re-designed hose get smaller bend radium less than 3 inches, fit both hot water and cold water use, and fast-moving. Instead of a plastic hose, this rubber hose could be used on kinds of surfaces with great abrasion resistance.


Kink resistantnew upgraded material can keep tangle-free under pressure. Using tips: lay flat the hose from the box to full length before connection, Motorcycle, the shape will relax, Siding, Windows, Floors, and the hose will not be kinked.
In the winter, Driveways, Roofs and so on. Great for washing car, lay it out in the sun for an hour, this will help you to move and store it easier. Heavy duty versionnew development high-density material bring great strong and heavy-duty hose for your power washer, fit up to 3200-3700 PSI / 2. 0-3. 0 gpm power washer, great replacement for rubber hose because of Light Weight and Non-Marking. 50 ft x 1/4 inch x m22-14mm metric thread, troy-bilt, generac, Simpson, b&s, ryobi, etc.


0 button nose, rotating nozzle, 1/4" quick connector and PTFE tape. Orifice 4. 0 Pe pipe, can resist weather, very durable, ozone and abrasion. Orifice: 4. 5. Hourleey sewer jetter hose can be connected to pressure washer pump with American standard M22 to 1/4" connector.
Button nose sewer nozzle: 1 front jet located at 0 degree, which can flush the blockage. Rotating sewer nozzles: 3 rear jets at 33 degree, The nozzle is easy to slide into the drain and sewer lines to clean and flush debris. Durable jetter hose: small-diameter, pvc coating, oil, Dual-layer terylene reinforcement, flexible sewer hose with a connector that allows hoses and nozzles to pass through sewer lines.

Ideal for quick exchange of pressure washer outlet, sewer jetter hose, guns and nozzles.
Cover layer is made of thermoplastic polyurethane, abrasion and ozone. Professional sewer jetter kit includes: 1 × 100ft sewer jet hose, 1 × m22 female to 1/4’’ female npt coupler, 1 × 1/4’’ quick connect plug, 1 × rotating sewer jetter nozzle, orifice 4.0, 1 × button nose sewer jet nozzle, 1 × corner sewer nozzle. 1x waterproof tape, 2xspanners, 1x box of pearl corsage pin. Orifice 4. Complete sewer jetter kit to meet your variety need.

Flow rate is 2. 5 gpm to 5 gPM. It's easy to carry, drag and roll up. Max working temperature is 140℉ / 60℃. Package include- 1 * steel wire braided 100 feet pressure washer hose, 1 * M22 14mm female & 3/8 inch male plug, 1* M22 14mm female & 3/8 inch female coupler.
Pressure washer hose 4200 psi- max working pressure of this high pressure washer hose can reach 4200 psi. Pressure washer hose100 ft- the pressure washer hose 100 ft is high tensile wire braided, it's durable and able to support quite high working pressure. Its innovative high-tech materials and processes can extend the service life and are safe to use, suitable for household cleaning & commercial use. Warm tips: it's a pressure hose, damaged, not a garden hose.

Alert: this is a high-pressure hose, not a garden hose. Improved quick connectors - our hose is equipped with 3/8" quick connectors: 3/8" quick connect high-quality brass socket female and 3/8" high-quality steel plug male. Work temperature 35°f to 212°F0°C to 100°C.
Suitable for pressure washers only. Professional grade material - our 100 ft x 3/8 inch high-pressure washer hose is made of high-quality synthetic rubber and R-1 high tensile braid, Designed for a high-performance commercial, industrial pressure washing yet also compatible for around your home and small business use! Max PSI Rating: 4200, with the burst pressure rating being up to 16000 PSI. Essentail information - length: 100ft x 3/8in, max rating: 4200 PSI, Easy connections: 3/8" Male quick connect plug x 3/8" Female quick connect socket.
1. RIDGE WASHER
#ad
100 Feet Hose, 1/4 Inch, Laser and Rotating Sewer Nozzle, Drain Jetting, 4.5…, RIDGE WASHER Sewer Jetter Kit for Pressure Washer, 4000 PSI, Orifice 4.0
#adRIDGE WASHER #ad - Inner tube is made of thermoplastic polyester. The sewer jetter hose can connect to pressure washer pump with M22 coupler female M22 to female 1/4” NPT. Reinforcement layer is chemically bonded of 1/4 high tenacity polyester textile braid. It can also connect to trigger gun or pressure washer wand with 1/4” quick disconnect plug.Laser nozzle has 1 front jet and 3 rear jets. The other end is swivel which releases stress between sewer hose and gun / pressure washer oulet. The 1 front jet at 0°spray angle can clear blockages and 3 rear jets at 33°spray angle can flush out debris loosened by the front jet.
More information #ad
Rotating sewer jet nozzle has 3 backward spouts that is easy to slide into drain pipes and sewer lines. 100 ft sewer jet hose is iso 9001 certified and it is made of 3 parts. The orifice is 4. 5. Working pressure is rated to 4400 PSI. Burst pressure is rated to 11000 PSI. Sewer jetter hose has a solid end which connects to sewer nozzle. Including sewer jet hose, rotating sewer jetting nozzle, laser sewer jet nozzle button nose, M22 female to 1/4 inch female NPT coupler and 1/4 inch quick connect plug. Cover layer of is made of thermoplastic polyurethane, weather, ozone, able to resist oil, and abrasion.
Brand | RIDGE WASHER #ad |
Manufacturer | RIDGE WASHER #ad |
Height | 1 Inches |
Length | 10 Inches |
Weight | 5 Pounds |
Width | 9 Inches |
More information #ad
2. YAMATIC
#ad
4000 PSI Commercial Grade Steel Wire Braided & Synthetic Rubber Jacket, Kink-Free, YAMATIC 3/8" Pressure Washer Hose 100 FT with Swivel Quick Connect For Cold & Hot Water Max 250°F
#adYAMATIC #ad - Better support your home wash car, roofs, motorcycle, floors, driveways, will help you more relax without hose kink, Windows, this 3/8" pressure washer hose come with one swivel 3/8" quick connect brass socket end and one 3/8" steel plug, Siding. Swivel for kink freeeverybody struggle with hose kink and wasting time for the weight of rubber hose, could handle washing job easier and faster.Work temperature 35°f to 250°f0°c to 121°c, great for all-weather, easy drag, 50% much flexible than the cheap stiff hose, remove the heavy dirty easier and faster. Universal and longetivy fittinghigh grade usa standard 3/8" brass socket and steel plug, 100% production line check and guarantee without leak for your power washer connection.
More information #ad
Replacable 3/8" brass socket and steel plug construction, this hose designed for your long time running and low-cost fix. Commercial grade construction100 ft pressure washer hose is made of high-quality synthetic rubber and one layer high tensile braid, fit Max 4500 PSI / 2. 5-5. 0 gpm gas power washer, fit real 4000 psi working pressure with 12000 PSI burst pressure, Designed for a high-performance commercial and industrial pressure washer also compatible for homework and small business, professional replacement power washer hose for the most brand pressure washer. Real high qualityif you're looking for a hose that could use for 3 to 5 years and even longer, this hose is a good choice for you. Germany engineering upgraded high tensile steel wire braid and germany engineering re-designed hose get smaller bend radium less than 3 inches, fit both hot water and cold water use, and fast-moving. Instead of a plastic hose, this rubber hose could be used on kinds of surfaces with great abrasion resistance.
Brand | YAMATIC #ad |
Manufacturer | YAMATIC #ad |
Height | 3 Inches |
Length | 11 Inches |
Width | 11 Inches |
More information #ad
3. InterChange
#ad
100 ft 3/8" Blue Non-Marking 4000psi Pressure Washer Hose Includes QC Couplers
#adInterChange #ad - Tough cover for extra protection. Extremely flexible Blue Non-Marking Cover. 3/8'' single wire Braid R1 Hose. For use with hot Or Cold Water Washers. Extra steel wire for additional density.More information #ad
Brand | InterChange #ad |
Manufacturer | Interchange #ad |
Weight | 26 Pounds |
Part Number | 3648-QC |
More information #ad
4. YAMATIC
#ad
M22-14mm Female Thread, Up to 3200 PSI & Burst 9000 PSI, YAMATIC Pressure Washer Hose Heavy Duty & Wear Resistance Upgrade, Non-Marking 50 FT X 1/4"
#adYAMATIC #ad - Health eco-materialhose comply with environmentally-friendly rohs standards and using recycled material, to protect your health and our earth clean. Solid brass m22-14mm metric thread provides a smooth and no-leak connection. Higher performancedesigned for high-performance gas power washer.Kink resistantnew upgraded material can keep tangle-free under pressure. Using tips: lay flat the hose from the box to full length before connection, Motorcycle, the shape will relax, Siding, Windows, Floors, and the hose will not be kinked.
More information #ad
Advanced wear resistancehigh strength pure material with "glossier" finishing surface is 3X wear-resistant than traditional pressure washer hose, especially on the rough ground. Please note: keep the hose away from engiNE EXHUST. In the winter, Driveways, Roofs and so on. Great for washing car, lay it out in the sun for an hour, this will help you to move and store it easier. Heavy duty versionnew development high-density material bring great strong and heavy-duty hose for your power washer, fit up to 3200-3700 PSI / 2. 0-3. 0 gpm power washer, great replacement for rubber hose because of Light Weight and Non-Marking. 50 ft x 1/4 inch x m22-14mm metric thread, troy-bilt, generac, Simpson, b&s, ryobi, etc.
Brand | YAMATIC #ad |
Manufacturer | YAMATIC #ad |
Height | 6 Inches |
Length | 6 Inches |
Weight | 4 Pounds |
Width | 3 Inches |
Part Number | HOSE 3050AB |
Model | HOSE 3050AB |
More information #ad
5. Ultimate Washer
#ad
Ultimate Washer 4000 PSI 3/8" x 100' Grey Non-Marking Abrasion Resistant Pressure Washer Hose w/Quick Connects
#adUltimate Washer #ad - 3/8" x 100 ft grey non-marking Pressure Washer Hose. Hose connection: 3/8" male NPT 1 solid & 1 swivel. Max temp: 140 degrees F Black bend restrictor on each end.More information #ad
3/8" quick connect female Coupler 3/8" Quick Connect Male Plug. Working pressure: 4000 psi - 276 bar burst pressure: 12000 PSI - 827 Bar Proof Pressure: 8000 PSI.Brand | Ultimate Washer #ad |
Manufacturer | Ultimate Washer #ad |
Height | 3 Inches |
Length | 16.5 Inches |
Weight | 8.9 Pounds |
Width | 16 Inches |
More information #ad
6. Hourleey
#ad
4000 PSI, Hourleey Sewer Jetter Kit for Pressure Washer, Orifice 4.0 Button Nose and Rotating Sewer Jetting Nozzle, 1/4 Inch NPT, 100 Ft Drain Cleaning Hose
#adHourleey #ad - It can also be connected to pressure washer gun or pressure washer wand via the 1/4" quick connector. Package include: 100 ft drain cleaning hose with 1/4" npt male connector on the end, M22 quick connector to 1/4" female thread, Orifice 4.0 button nose, rotating nozzle, 1/4" quick connector and PTFE tape. Orifice 4. 0 Pe pipe, can resist weather, very durable, ozone and abrasion. Orifice: 4. 5. Hourleey sewer jetter hose can be connected to pressure washer pump with American standard M22 to 1/4" connector.
More information #ad
Widely application: suitable for many electric / gas-powered pressure washers up to 4, 000 PSI. 3 rear jet at 33 degree, flush away debris loosened by the front jet. Button nose sewer nozzle: 1 front jet located at 0 degree, which can flush the blockage. Rotating sewer nozzles: 3 rear jets at 33 degree, The nozzle is easy to slide into the drain and sewer lines to clean and flush debris. Durable jetter hose: small-diameter, pvc coating, oil, Dual-layer terylene reinforcement, flexible sewer hose with a connector that allows hoses and nozzles to pass through sewer lines.
Brand | Hourleey #ad |
Manufacturer | Hourleey #ad |
Length | 100 Feet |
More information #ad
7. West Bay
#ad
Sewer Jetter Kit 100FT for Pressure Washer, 5800PSI Drain Cleaner Hose 1/4 Inch NPT, Corner, Rotating and Button Nose Sewer Jetting Nozzle Spanner Waterproof Tape Pearl Corsage Pin
#adWest Bay #ad - 2 spanners are preapred for easy to install nozzle or coupler, siding, and waterproof tape can help prevent water leak. Reinforcement layer is 1/4" high tenacity polyester textile braid which is chemically bonded. Quick connect plug and female metric m22 to 1/4 inch female npt fittingquick connect plug used in a lot of situations where high pressure connections are frequently assembled or disassembled.Ideal for quick exchange of pressure washer outlet, sewer jetter hose, guns and nozzles.
More information #ad
It makes a solid connection with quick coupler each time. Pressure washer coupler convert metric M22 14mm female NPT thread to 1/4" Female NPT. 3 rear jets at 33° flush out debris loosened by the front jet. Cover layer is made of thermoplastic polyurethane, abrasion and ozone. Professional sewer jetter kit includes: 1 × 100ft sewer jet hose, 1 × m22 female to 1/4’’ female npt coupler, 1 × 1/4’’ quick connect plug, 1 × rotating sewer jetter nozzle, orifice 4.0, 1 × button nose sewer jet nozzle, 1 × corner sewer nozzle. 1x waterproof tape, 2xspanners, 1x box of pearl corsage pin. Orifice 4. Complete sewer jetter kit to meet your variety need.
Brand | West Bay #ad |
Manufacturer | West Bay #ad |
More information #ad
8. POHIR
#ad
High Tensile Wire Braided Power Washer Hose, with 2 Quick Connect Kits Compatible M22 14 mm, Hose for Pressure Washer, POHIR Power Washer Hose 100FT 3/8'' Quick Connect, 4200 PSI
#adPOHIR #ad - Warm tips: for ease of movement and storage, please lay the hose flat to its full length when using it for the first time. The burst pressure is up to 16000 PSI. Inner tube is reinforced with synthetic rubber. It's designed to be compatible with most brands of power washers. Suitable for pressuer washer only.Flow rate is 2. 5 gpm to 5 gPM. It's easy to carry, drag and roll up. Max working temperature is 140℉ / 60℃. Package include- 1 * steel wire braided 100 feet pressure washer hose, 1 * M22 14mm female & 3/8 inch male plug, 1* M22 14mm female & 3/8 inch female coupler.
More information #ad
3/8 quick connect pressure washer hosethe hose is equipped with 3/8" quick connector which is not only easy to connect & disconnect, but also helps connect firmly to the pressure washer without being easily shaken, rusted or leaked. Kink resistant pressure washer hose- the combination of high-quality materials and high-tech craftsmanship brings excellent kink resistance. Pressure washer hose 4200 psi- max working pressure of this high pressure washer hose can reach 4200 psi. Pressure washer hose100 ft- the pressure washer hose 100 ft is high tensile wire braided, it's durable and able to support quite high working pressure. Its innovative high-tech materials and processes can extend the service life and are safe to use, suitable for household cleaning & commercial use. Warm tips: it's a pressure hose, damaged, not a garden hose.
Brand | POHIR #ad |
Manufacturer | POHIR #ad |
Height | 13.97 Inches |
Length | 13.97 Inches |
Width | 5.51 Inches |
More information #ad
9. PEGGAS
#ad
PEGGAS, 100FT Pressure Washer Hose with 3/8 Inch Quick Connect, 4200 PSI, High Tensile Wire Braided Power Washer Hose
#adPEGGAS #ad - Upgraded psi rating - with improvements to the high tensile steel wire braid we use in our 100ft high-pressure washer hose, which is more than 50% more flexible than a cheap, we've been able to increase the rating to 4200 PSI as well as made the hose more flexible able to reduce our bend radius less than 2 inches, stiff hose Chinese hose.Alert: this is a high-pressure hose, not a garden hose. Improved quick connectors - our hose is equipped with 3/8" quick connectors: 3/8" quick connect high-quality brass socket female and 3/8" high-quality steel plug male. Work temperature 35°f to 212°F0°C to 100°C.
More information #ad
Great service: if you have questions, contact us at any time day or night! We are a USA based company and are able to provide answers over the phone or email! Welcome to The Waspper & PEGGAS family, please check out our store pages to see other pressure washer accessories. Which are very easy to connect & disconnect. Suitable for pressure washers only. Professional grade material - our 100 ft x 3/8 inch high-pressure washer hose is made of high-quality synthetic rubber and R-1 high tensile braid, Designed for a high-performance commercial, industrial pressure washing yet also compatible for around your home and small business use! Max PSI Rating: 4200, with the burst pressure rating being up to 16000 PSI. Essentail information - length: 100ft x 3/8in, max rating: 4200 PSI, Easy connections: 3/8" Male quick connect plug x 3/8" Female quick connect socket.
Brand | PEGGAS #ad |
Manufacturer | IGT Group #ad |
Part Number | 4336552029 |
More information #ad