As an Amazon Associate I earn from qualifying purchases.
1. MOES #ad
MOES Dual Power Controller 50A 5500 Watt Automatic Transfer Switch for Off Grid Solar Wind System ATS DC 12V 24V 48V AC 110V 220V. #adMOES #ad
- Auto distinguish: dc 12/24/48v, lead-acid, ac 100-120v 60hz / 220-240v 50hz auto distinguish. User can define the cut-off and recovery voltages. Recovery voltage must be higher than Cut-off voltage. Big power: 5. 5kw110v or 11kw220v, fast transfer time:Inverter transfer to public power ≤10ms, public power transfer to inverter ≤16ms.
Lcd display: battery real-time voltage;working status of public power, inverter and battery. Note: the controller needs to connect the battery, powered by the battery and get battery power data.
Works like an opposite direction ups: the ats controller will switch to grid power when batteries votagle are lower than cut off point, it will switch back to battery power when the batteries votagle are higher than recovery point.
As long as the voltage of your battery are within the voltage ranges in the followings. 9-17v at 12v system;18-30v at 24v system; 30-60V at 48V system. Battery type: suitable for Sealed, Gel, Lithium battery and so on. Beneficial to solar or wind system: On cloudy or windless days when your battery gets low, it will automatically switch to grid power, protect your battery.
2. Pikasola #ad
Pikasola Wind Turbine Charge Controller Mini Wind Turbine Generator Controller IP67 Waterproof 12V/24V Automatic Controller Suitable for 400Watt 500Watt 600Watt Wind Turbine System #adPikasola #ad
- Voltage and current limiting are be controlled during recharging to ensure the best charging effect. So wind controller to protect the wind turbine and the battery. Also including lightning protection, automatic over-voltage braking, battery reverse connection and open protection.
2. Automaticity-: this wind turbine controller can auto match 12/24 system. Charge controller can work steadily even in very humid environment. The rectification and brake circuit part has adopted integrated module design, whatever heat dissipation or reliability, all further advanced than the traditional design.
It helps to control wind generator charge battery automatically. When the battery voltage drops to restore voltage level, wind turbine can recover to charge battery automatically.
Make the whole system will be more reliable. For improper operation of positive and negative electrode, user don't need to replace the fuse, only to reset the positive and negative in correct point. 1. Wind turbine controller-: wind charge controller can be used for 0-600w wind turbine. When the battery is fully charged, brake can be taken effect automatically by the interior circuit. Protection- the fully waterproof protection which grade reach into IP67 above.
3. Pikasola #ad
30A Hybrid Charge Controller for Off Grid Max 800W Wind Turbine Charge and 1000W Solar Panel with MCT Charging Function., Pikasola Hybrid Wind Controller and Solar Controller for 12V/24V Battery Auto #adPikasola #ad
- Protection function-: over charge voltage/under voltage & Over load voltage Protection, Lightning Protection, battery reverse connects and open circuit protection, etc. Charge controller for wind and solar can work steadily even in very humid environment.
Ip67 waterproof-: the fully waterproof protection which grade reach into IP67. Operational system-: the charge controller use pwm technology by MOS tube in series which make solar and wind charge more efficient.
So the controller keep in an optimal heat dissipation state for a long time. Especially mct charging function tracks the maximum current of the solar panel in real time.
Good heat dissipation-：wind controller use aluminum alloy shell with multi-edge bottom plate design, which increase the heat dissipation area. Scope of use-: hybrid charge controller 12/24V auto match for max 800w wind generator and max 1000w solar panels for wind&solar complementary system.
4. Caredy #ad
Wind Charge Controller,48V Waterproof Wind Turbine Generator Controller Boost MPPT Wind Charge Controller 800W Wind Power Regulator for Wind Generator #adCaredy #ad
- With perfect overcharge protection, reverse connection protection, short circuit protection, high temperature protection and other functions, it is more safe and convenient to use.
Heat conductive silicone is used for filling and sealing, which is waterproof, dust proof and circuit oxidation proof. Compared with the traditional PWM charging controller, it greatly improves the charging capacity and the utilization efficiency of the power generation system.
Mppt boost charging, sufficient energy, breeze low voltage can start, can solve the problem of slow fan speed can not be charged. Ip67 protection grade, oxidation-resistant, waterproof, this controller is dust-proof, durable and wear-resistant.
5. Pikasola #ad
Wind Generator Kit with Charge Controller, RV, Windmill Generator Suit for Hybrid Solar Wind System, Wind Power Generator for Marine, Pikasola Wind Turbine Generator Kit 400W 12V with 5 Blade, Home #adPikasola #ad
- Wind blade: 23. 8 inch in length, the longer blade will generate more power. Base on designed after repeated experimental testing. Wind generator: three-phase permanent magnet synchronous motor. Pls remember to contact us if you have any questions after received wind turbine.
Feature: starting with 2. 5m/s low wind speed; Low vibration during working; High wind energy efficiency. Efficient and compact ac generator with high performance NdFeB permanent magnet.
The tail fin is designed according to the aerodynamic principle. Real parameter, not false: our product parameters are real & Actual, not False.
The blades are made of Nylon carbon fiber which special on waterproof, corrosion resistant, lightweight. We should take charge of our product. Rotating aluminum alloy body: with yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. Wind turbine kit suitable for boat, home, RV, cabin, etc.
6. Ginorgee #ad
12V/24V 300W/600W Waterproof Wind Turbine Generator Charge Controller Regulator, Wind Turbine Controller #adGinorgee #ad
- With short circuit, overload, anti-reverse protection, full, over-discharge automatic shutdown, recovery and other protection measures. Comprehensive waterproof protection, not easy to be corrosive and get damaged in humid conditions, more reliable.
Automatically identify the voltage 12V or 24V, low-power consumption. Wide application field: suitable for solar street lamp, and killing lamp, courtyard lamp, small solar power station system, and all kinds of wind power DC power supply system. The led indicates the working state of the circuit, simple, intuitive and clear.
7. YWBL-WH #ad
Wind Charge Controller,12V/24V 300W/600W Waterproof Wind Turbine Generator Charge Controller Regulator #adYWBL-WH #ad
- Waterproof:wind turbine controller adapts comprehensive waterproof protection, not easy to be corrosive and get damaged in humid conditions, more reliable. Widly application: wind charge controller is suitable for solar street lamp, and killing lamp, courtyard lamp, small solar power station system, and all kinds of wind power DC power supply system.
Specification: model: sf-12-24-a rated battery voltage: 12v/24v rated wind turbine power: 300W/600W Working temperature range: -35~75℃ Protection type: IP67 Weight: Approx.
264g/ 9. 3oz. Protective function:wind generator controller can automatically identify the voltage 12V or 24V, anti-reverse protection, over-discharge automatic shutdown, full, overload, low-power consumption. With short circuit, recovery and other protection measures. Package list:1 × Wind Turbine Controller.
8. Pikasola #ad
Pikasola 1400W 12/24v Battery Off Grid Controller Wind Turbine Solar Hybrid MPPT Charge Boost Controller with Unloader Suitable for 800w Wind Generator 600w Solar Panel System Controller #adPikasola #ad
- Second load model the same as first one automatically. Protection function-: reversed charging protection of solar, battery reverse connects and open circuit protection, over charge voltage/under voltage & Over load voltage Protection, Lightning Protection, etc.
Load working mode-：two loads dc output have 4 working models for customer to choose. Easy to understand, convenient to handle and setting.
Display mode-: use a custom lCD screen and four operation keys. Solar panel charging use PWM technology by MOS tube in series. Operational system-: the wind turbine charging part adopts booster MPPT technology, which make it charge continuous and efficiently even in low wind speed.
Stepless unloading function including an external dump-load resistance. Scope of use-: hybrid charge controller 12/24v auto match for max 800w wind generator and max 600w solar panels for wind solar street light or home wind solar complementary system.
9. Dyna-Living #ad
Dyna-Living Wind Turbine Generator Kit 800W Wind Turbine Motor with Charge Controller Power Generation Kit for Home UseNot Included mast #adDyna-Living #ad
- Teflon wire is heat resistant, good wind resistance for double-row bearing. High wind energy utilization-the coil is made of teflon wire, which is resistant to high temperatures. Unique design- the wind turbine generator adopts a permanent magnet rotor alternator and with a special kind of stator design, efficiently decreases resistance torque guarantees stability.
It is smooth in operation, low noise and long service life. High-quality and durable- the wind turbine motor adopts a three-phase AC permanent magnet synchronous generator, free running, which is not easy to damage the wire when the machine is overloaded. It has effective regulation of current and voltage, low start-up speed but high wind energy utilization factor, which contributes to the annual energy output.
The blades using reinforced glass fiber helped with optimized structure and aerodynamic shape, it enhanced wind power coefficient and power generating capacity.
High-quality 3 blades of wind turbine generator-the blade is equipped with a copper inlay part that does not damage the nylon fiber when the bolt is tightened, the blades are not easily deformed or broken. The working temperature is -40 ° c ~ 80 ° C, do not worry about the temperature being too low and causing the leaves to freeze. Wide application-this wind turbine generator is easy installation and maintenance, home, as well as for green windmills, which is suitable for the leisure sector, cabins or mobile homes, gazebos, such as being used for boats, corporate and industrial energy for electricity supply.
10. Marsrock #ad
Original Factory 1400W 12V/24V Off Grid MPPT Wind Solar Hybrid Charge Controller Design for 0- 800W Wind with 0- 600W Solar Panel system with Booster Function and Dump Load #adMarsrock #ad
- Wind turbine charging adopted booster MPPT technology, which makes under low wind speed, the Wind turbine's electricity can still be used. 5. The controllers with perfect protection function, solar charger, over-voltage automatic braking, storage battery reverse connect and open protection, including: lightning counter-attack, etc.
4. Manmachine interface of the controller uses a custom LCD screen and four key operation mode, popular and easy to understand, the user to use simple and easy to use, convenient and quick.2
2. In the high wind speed or the wind turbine of power is beyond the scope of the battery and load absorption, the controller immediately launched the stepless unloading function, protection system of the equipment.
3. Discharge part working mode can be set, time control function etc, light control mode, The user can be set up according to the requirements on its own combination. 1. 12/24v auto match for 0-800w wind, 0-600w solar system.