Top 10 Water Chiller Hydroponics – Top Selection from AmazonPets

As an Amazon Associate I earn from qualifying purchases.

1. EcoPlus

 #ad

EcoPlus Chiller, 1/10 HP

#ad
EcoPlus #ad - Country of Origin: China. The micro computer with digital LCD display allows for easy operation. Fittings are 1/2 inch; 120v-60Hz/264 watts/2;2 Amps. Pump size: minimum 66 GPH/Maximum 317 GPH.
BrandEcoPlus #ad
ManufacturerEcoPlus #ad
Height18.3 Inches
Length17.1 Inches
Weight25 Pounds
Width15.5 Inches
Part NumberEP1123
ModelEP1123

2. EcoPlus

 #ad

EcoPlus 728709 Chiller, 1.5 HP

#ad
EcoPlus #ad - High-quality japanese Compressor Is Extremely Efficient And Reliable. Your purchase includes one ecoplus chiller of 1. Cord | pump is not included.

Hp for fresh or saltwater, 728709 model | One remote controller, one 30 ft. Chiller dimensions – 15” w x 41" l x 24" h | recommended pump – ecoplus 1267 gph | voltage – 120v 60hz | recommended tank size hydroponic application – 300 gal | Recommended tank size aquarium application – 300-500 gal | Volume Cubic Feet: 8. 542. No assembly is Required. Features a commercial-grade titanium heat exchanger for optimum performance and corrosion resistance.
BrandEcoPlus #ad
ManufacturerSunlight Supply Inc. #ad
Height24 Inches
Length41 Inches
Weight94 Pounds
Width15 Inches
Part Number728709
Model728709
WarrantyManufacturer Warranty

3. Hydrofarm

 #ad

Hydrofarm Active Aqua Chiller, 1/10 HP

#ad
Hydrofarm #ad - Environmentally friendly uses R134a and surge protected, will automatically turn off in the event of a power surge. Rated btu per hour 960 Large refrigeration capacity recommended 13-105 gal, 50-400 L. Microcomputer control system and LCD display, very user-friendly. Capable of chilling approximately 40 gal by 15 F, and 13 gal by 30 F in 20 hrs. Tubing size: 1/2" hgtb50, 3/4" hgtb75 comes with two sets of fittings.
BrandHydrofarm #ad
ManufacturerHydrofarm, Inc. #ad
Height21 Inches
Length15 Inches
Weight33.35 Pounds
Width21 Inches
Part NumberAACH10
ModelAACH10

4. Bluelab

 #ad

Temperature, Bluelab MONGUA Guardian Monitor for pH, and Conductivity Measures, Easy Calibration and Wall Mounted

#ad
Bluelab #ad - Other features: international power supply, high RF tolerance, units for temperature; KIT INCLUDES calibration solution. 24/7 monitor for your nutrient and ph level to maximize your grow and ensure plants get the balanced feed they need; high and low alarm when outside parameters.

Made in new zealand and manufactured by Bluelab, the industry leader in hydroponic testing equipment; 2 Year Limited Warranty with proof of purchase. Easy two point calibration and auto temperature compensation makes this digital meter a handy tool with backlit LCD display and calibration reminders. Mountable unit measures ph, drinking water, temperature and tds EC, ppm 500, ppm 700 and cf with lab quality glass that can be used for the pool, brewing, hydroponics, and growing.
BrandBluelab #ad
ManufacturerBluelab Corporation Limited - Import (NZ) #ad
Height1.57 Inches
Length7.6 Inches
Weight0.48 Pounds
Width4.92 Inches
Part Number716336
ModelBLU27100
WarrantyTwo year free repair or replacement guarantee. 6 month guarantee for ph probe

5. JBJ

 #ad

JBJ Aquarium Arctica Titanium Chiller, 1/10 HP

#ad
JBJ #ad - The most quietest chiller on the market. Corrosion resistant; contains safe ozone friendly refrigerant R-134A. Highly efficient condenser; use less energy.
BrandJBJ #ad
ManufacturerTransworld Aquatic #ad
Height20 Inches
Length13 Inches
Weight41 Pounds
Width19 Inches
Part Number1/10 HP
Model1/10 HP
Warranty2 Year Limited Manuafacturer From the Date of Purchase

6. Mr. Stacky

 #ad

16.5 Gallon Deep Water Culture DWC Hydroponic Growing System Complete Kit 1

#ad
Mr. Stacky #ad - Share and inspire others with your passion. Attractive easy to use complete Deep Water Culture Hydroponic System. Dimensions: 18.

5"l x 18. 5"w x 16"h; 16. 5 gallon reservoir; includes: base reservoir, clay pebbles, New Pot, Lid, rockwool Cubes, and Pump with Venturi Air Tube - Thank you very much! Be sure to register your garden with Mr Stacky after purchase. Huge 16. 5 gallon reservoir Deep Water Culture DWC Hydroponics System. Refill less often & maintain more consistent growth - Made In USA! Use pole holes on the lid to add a trellis or Lighting - No need to hide this well designed garden from visitors.
BrandMr. Stacky #ad
ManufacturerMr. Stacky #ad
Height16 Inches
Length18.5 Inches
Width18.5 Inches

7. Simple Deluxe

 #ad

Simple Deluxe 1056 GPH Submersible Pump with 15' Cord, Aquariums & Inline, Hydroponics, Fountains, Water Pump for Fish Tank, Ponds, Statuary, Aquaponics

#ad
Simple Deluxe #ad - The thicker ones are for Inline use and the thinner ones are for outlet. Versatile - circulate and aerate the water, fountains, making it more attractive to your fish or turtles. 83 inch, 1. 06 inch, 1. 34 inch – please note inline and outlet nozzles has different thread size.

Our electric cord is waterproof, resists oil/grease/moisture, 18# gauge copper wire, heavy duty flexible vinyl jacket, molded plug with ground, abrasion resistant and very good flexibility at all temperatures. Epoxy resin encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts. 1 has pre-filter included - pre-filter on the intake prevents debris from entering your pump and extend the life of your pump, max flow rate: 1056 GPH, max lift height 12 feet.

Durable quality - our polished aluminum oxide ceramic impeller shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. 3 size threaded nozzles. Easy to clean with no tools required to disassemble and clean filter/impeller. Safe & easy - safe for fish with no exposed copper. This submersible pump is perfect for aquarium, spout and hydroponic systems.
BrandSimple Deluxe #ad
ManufacturerSimple Deluxe #ad
Height7.08 Inches
Length8.3 Inches
Weight4.5 Pounds
Width4.64 Inches
Part NumberLGPUMP1056G
ModelLGPUMP1056G

8. mistcooling

 #ad

Made in USA, Decreases the pool water temperature 8-10 degrees, No extra energy required to operate, Easy to Dismantle, Fits 1 1/2 Inch Return Jets., Pool Cooler, Easy to Install, Do it yourself Install

#ad
mistcooling #ad - Easy installation and removal, does not require glue, just slip. Operating cost is zero. To be attached at the pool return Jet, once you remove the Eye ball cap, eye ball and inner pool wall adapter.

Inner pool wall adapter can be remove with removal key sold separately or can be purchased from any pool store. Decreases the pool water temperature 8-10 degrees. Runs with in-ground. Increase the life of pool liners Will fully functional in less than 30 seconds. No need to glue pool cooler - Reduce Pool water temperature by 8 to 10 degree F. Suitable for standard in-ground Pool having 1. 1/2" threads after removal Eye ball seat pool wall fitting. Kids love its mist curtain a lot. Energy efficient.
Brandmistcooling #ad
ManufacturerMistcooling #ad
Height1.5 Inches
Length24 Inches
Weight3 Pounds
Width1.5 Inches
Part NumberPC-38In
ModelEasy to Install, Easy to Dismantle

9. EcoPlus

 #ad

Natural, 0.5, EcoPlus 728707 Commercial Grade Water Chiller 1/2 HP fertilizers

#ad
EcoPlus #ad - Chiller dimensions – 14” w x 34" l x 21" h | recommended pump – ecoplus 1056 gph | voltage – 120v 60hz | recommended tank size hydroponic application – 100 gal | Recommended tank size aquarium application – 100-250 gal | Volume Cubic Feet: 5.

922. Features a commercial-grade titanium heat exchanger for optimum performance and corrosion resistance. Cord | pump is not included. High-quality japanese Compressor Is Extremely Efficient And Reliable. No assembly is Required. Your purchase includes one ecoplus chiller of 1/2 hp for fresh or saltwater, 728707 model | One remote controller, one 30 ft.
BrandEcoPlus #ad
ManufacturerSunlight Supply Inc. #ad
Height21.5 Inches
Length34 Inches
Weight66.7 Pounds
Width14 Inches
Part NumberGL56728707
Model728707

10. EcoPlus

 #ad

Fountain, Pond, Fish Tank, EcoPlus 290 GPH 1098 LPH, 17W Submersible Water Pump w/ 6 ft Power Cord | Aquarium, Hydroponics

#ad
EcoPlus #ad - Suitable for installation on dry land for in-line use or submersibly into the water. Included fittings:. 75" barbed x. 75" threaded, two-. 5" barbed x. 75" threaded and Nozzle x 3. 4" threaded. 264 gallons per hour; 28 watt motor. Pre-wired 69 inch 120v power cord. Suitable for use in hydroponic systems, fresh and saltwater aquariums, ponds, fountains and filter systems.
BrandEcoPlus #ad
ManufacturerSunlight Supply Inc. #ad
Height4.5 Inches
Length8.4 Inches
Weight2.05 Pounds
Width6 Inches
Part Number728305
Model728305