As an Amazon Associate I earn from qualifying purchases.
1. Renogy #ad
Renogy Wanderer 10 Amp 12V/24V PWM Negative Ground Solar Charge Controller Regulator Compatible with Bluetooth Module #adRenogy #ad
- Integrated 5v 2a usb ports to charge USB devices. Then secure each cable by rotating the screws clockwise CW to the closed position. Capable of charging over-discharged lithium batteries. Smart 4-stage pwm charging bulk, and equalization increases battery life and improves system performance.
Compact in size makes it easy to install virtually anywhere. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position.
Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW. Power source Type: Solar-Powered. Backlit lcd screen displays system operation, diverse load control, and error codes. Intelligent protection against reverse polarity, Boost, Float, short-circuit, overcharging, and reverse current.
Optimized for a 12v/24v system; deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready. Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch. Integrated rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy DC Home smartphone app.
|Part Number||Wanderer 10A|
|Model||Wanderer 10 Amp 12V/24V|
|Warranty||1-year material warranty|
2. Depvko #ad
Black Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display 30a, 2021 Upgraded 30A Solar Charge Controller #adDepvko #ad
- Safe to use: equipped with overcurrent protection, short-circuit protection, and overcharge protection, inverse connection protection, low voltage, and have fully 3-stage PWM charge management. Warranty: 12-month warranty and lifetime technique support. The solar controller will turn off automatically to protect the lifespan of your battery if the voltage of the battery drop below 8V.
Please note: the charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL. You can also charge your mobile phone, tablet, PCs through Dual USB output 5V/2. 5a max.
Do not support any other batteries. You can also switch modes and parameter configuration conveniently and can use this controller in a different place like home, commercial, industrial, etc. You don't need to reset it when the battery runs out cause it will memorize various parameters set by the user.
Lcd display: let you know the status and data with LCD Display. Upgraded solar panel controller: compatible with 12v 24v system. This solar charge controller helps you manage the working of solar panels and battery in solar systems automatically with the build-in industrial microcontroller. If there is any problem, please contact us through amazon email, we will arrange a refund or a replacement. This 30a solar charge controller will help you improve the system efficiency safely and prolong the life span of the battery.
3. HZRE #ad
Solar Charge Controller 80A PWM 12V 24V 1920W Solar Panel Charger Discharge Regulator with 5V USB Output Multip Circuit Protection Anti-Fall Durable ABS Housing Discharge Regulator for Lighting System #adHZRE #ad
- Enhanced heat sink: high-quality aluminum alloy heat sink, super efficient heat dissipation, Adjustable Charge-Discharge Parameter 4, Simple & Easy Button Operation 2, the thickest Part can Reach to 0.12 in.
Simple operation: 1, Operation Mode of Load is Settable. Abs material shell design: anti-fall & Durable Overall Design, Achieve the Longest Product Service Lifetime. Intelligent high-complex protection Technology: Short Circuit Protection, Overcharge Protection, Over-current Protection, Reverse Connection Protection.
Our controller is backed by full money back guarantee! if for any reason you are not satisfied with this purchase, kindly contact us and our dedicated world class customer support team will offer a replacement or full refund without any cost from your side! High charging ability: large power 80 amp solar charge controller, 12v/24v auto identification, 48V/1920W24V, 5V USB output, Max PV Array input Voltage/Power Battery Voltage: 24V/960W12V, Get Free Battery Monitor in the Package.
4. Renogy #ad
Renogy Rover 30A 12V/24V Auto DC Input MPPT Solar Charge Controller Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery, Rover 30A #adRenogy #ad
- Full system protectionmeant to safeguard your system, short-circuiting, the self-diagnostic capability can assess and protect against reverse polarity, overload, battery over-discharging, battery overcharging, and reverse current. Innovative mppt designdie-cast aluminium design ensuring excellent heat dissipation and Renogy Maximum Power Point Tracking technology with a high tracking efficiency of up to 99% and peak conversion efficiency of 98%.
Diverse load control connect dc appliances directly to the optional Load Terminals and monitor consumption or set up timer controls directly from the controller.
4-stage safely chargingfeatures 4-stage charging bulk, Absorption, Float, and Equalization of Lead Acid Batteries and 2-stage charging Bulk and Absorption for Lithiuim batteries as well as Lithium Reactivation.12v/24v automatically detectautomatically detects 12v or 24V DC system voltages, customizable parameters, and the LCD screen and multiple LED indicators display the solar charging and battery operation information, and error codes.
It is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day. Remote monitoringrs232 communication port allows the renogy rover to communicate with the Renogy BT-1 Bluetooth module NOT included in the package, highly recommend to add-on that will enable you to monitor the status and productivity of your panels through the Renogy DC Home App.
|Part Number||fit for Gel Sealed Flooded and Lithium|
|Model||fit for Gel Sealed Flooded and Lithium|
|Warranty||2-year material and workmanship warranty|
5. Thlevel #ad
Upgraded Solar Panel USB Port Solar Panel Battery Intelligent Regulator, Multi-Function Adjustable LCD Display Street Light Controller, Thlevel 2021 Upgraded Solar Charge Controller, 12V24V 30A #adThlevel #ad
- Build-in industrial micro controllerautomatically manage the working of solar panel and battery in solar system to support charging. Fully 3-stage pwm charge management, inverse connection protection, improve system efficiency and prolong the life span of the battery.
Good heat dissipationdual mosfet reverse current protection, low heat productionALL electronic components generate heat when they are running, it is better to shelter them for better heat dissipation, avoid direct sunlight exposure or damp place.
Easy to usebig lcd display, adjustable parameter, suitable for home, industrial, commercial etc.
Functionalityequipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management. Multiple protection functionsover-current and short-circuit protection, low voltage and overcharge protection.
6. HUINE #ad
HUINE 20A 12V 24V Auto IP68 Waterproof PWM Solar Charge Controller Solar Panel Battery Intelligent Regulator for Solar System Caravan Boat24 Hours Working Mode #adHUINE #ad
- Ip68 rated waterproof, solar monitoring system, this Intelligent 4-stage PWM solar charging controller is suitable for outdoor use, you can use it for solar fencing system, solar lighting system or other solar system.
Can automatically senses 12v or 24 Volt for your batteries, working mode of the solar charge regulator is 24 hours. It has short circuit protection, over charge protection, over discharge protection, reverse protection.
Easy to mount directly on the frame of the solar panel, with heat sink design at bottom and 2pcs mounting holes. Its small size also can saves you some space. With short cables for connecting with solar panel, and three LED lights can help you to know solar charging status, battery and load, battery level, and load status. Can extends battery life time.
7. Victron Energy #ad
Victron Energy SmartSolar MPPT 100V 50 amp 12/24-Volt Solar Charge Controller Bluetooth #adVictron Energy #ad
- Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect.
By constantly monitoring the voltage and current output of your solar PV panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
Smartsolar mppt 100-volt 50 amp: a solar charger gathers energy from your solar panels, and stores it in your batteries, fastest technology, Using the latest, SmartSolar maximises this energy-harvest.
The smartsolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged. Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
|Brand||Victron Energy #ad|
|Manufacturer||Victron Energy #ad|
8. ZEALLIFE #ad
ZEALLIFE Solar Panels Charge Controller, 8A Battery Regulator for 12V Solar Battery Charger, Solar Battery Maintainer and 12 Volt Batteries Power Kit Safe Protection #adZEALLIFE #ad
- Apply to 12v solar panels:the 8a solar controller is used only for 12V solar panels and 12V batteries. Advantage 1: it will turn off automatically at night, overload protection, over-discharge, and won’t consume battery power. The product also provides overcharge, overload protection, as well as short-circuit and reverse-connection protection.
The maximum input of solar energy is 130w:the maximum power of solar panels is130W, the maximum voltage 22V, and the maximum current 8A. Quick and easy connection:this solar charge controller uses SAE plugs for easy use and access to solar panels, batteries and loading equipment.
In order to lengthen its service life, please do not overload. Easy to monitor the led indicator lights: the solar controller integrates two LED lights, over-discharge, both green and red indicator lights on fully charged and only the red one charging.
The controller needs to be connected to a battery to work. Users don't have to worry about positive + and negative -. All-round protection :the product provides overcharge, as well as short-circuit and reverse-connection protection. Advantage 2: if there is connection errors，it will not be damaged. It is suitable for 12V rechargeable batteries. The solar panels can convert light energy into electric energy stored in batteries which will be protected by the solar controller.
|Part Number||Solar Panels Charge Controller 8A|
|Model||Solar Panels Charge Controller 8A|
9. Saooer #ad
12V/24V Solar Panel Intelligent Regulator with Dual USB Port and PWM LCD Display, 30A Solar Charge Controller,MPPT Solar Charger Controller #adSaooer #ad
- Discharge current is 30a, build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. Easy to usecharge controllers for solar panels should connect the battery first, industrial, adjustable parameter, suitable for home, then the solar panel, and finally the load.
Lcd display, commercial etc. Solar charge controllerthe solar charger controller compatibility with 12V 24V system. Smart lcd display shows the charging status and battery status to make you more assured of charging.
Safety chargingadopt abs flame-retardant shell, corrosion resistant, sparks, solid and durable, open-circuits, over-current, fireproof, electric shock, overcharging, Built in circuit protection guards against reverse polarity, short-circuits and overheating.
Lcd displaycomes with a display that can clearly indicate the status and data, solar charger can be conveniently switched modes and parameter configuration. Dual usb, to support mobile phone chargeing. Battery typefor protecting the lifespan of your battery, once the voltage of the battery out of range, the solar controller will turn off automatically.
10. EEEKit #ad
EEEKit 20A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display（Blue） #adEEEKit #ad
- Discharge current: 10a, build-in industrial microcontroller, automatically manage the working of solar panel and battery in solar system. Note: the charge controller will heat up when it is running. In order to protect the lifespan of the battery, Liions, the solar controller will turn off automatically.
Dual usb output 5V/2. 5a max, to support mobile phone charging. 20a solar charge controller20a solar panel battery intelligent regulator are ul 1741 certified, the solar charger controller compatibility with 12V 24V system. Fully 3-stage pwm charge management, Under-voltage protection, Overcharge protection, improve system efficiency and prolong the life span of the battery.
Functional lcd displayintuitive lcd display that can clearly indicate the status and data is able to switch modes and parameter configuration, industrial, suitable for home, commercial, etc. Please be careful to install the charger controller in a flat, then the solar panel, finally the load.
Easy to usethe charge controller should connect the battery first, low heat production. The disassembly sequence is contrary to the wiring order. Six protection functions20a solar controller has short-circuit protection, Overload protection, Over Current Protection, Over-voltage protection. Battery typethe charge regulator is only suitable for lead-acid batteries: opeN, AGM, lithium, once the voltage of the battery drop below 8V, it is not suited for nickel hydride, GEL, or other batteries.