As an Amazon Associate I earn from qualifying purchases.
Bora #ad - Stop the guesswork: effortlessly attach the ngx saw plate to your right- or left-handed saw with the adjustable quick-release clamps. Reduce tear out: prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip.
Attach it to the bottom of the NGX Clamp Edge for a smooth finish. And for big projects, increase the length up to 100 inches with the NGX 50” aluminum extension.
A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts. 100” of cutting capacity: the ngx 50” clamp edge is made of heavy-gauge, like a rip cut on a 4x8, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber.
Bora #ad - Locking handle grabs work surfaces for a secure grip that won’t budge. Use with circular saws, Jig saws, routers, and other portable power tools. Made of heavy-gauge, rigid aluminum for extreme durability.
Bora #ad - Versatile: sturdy construction makes them perfect for use as a work stop, a vise, or to increase your holding power. Non-marking grip: each track clamp has rubberized feet that hold tight to your material without leaving damaging indentations.
Cut any angle: bora track clamps can be used with the WTX and NGX Clamp Edge Systems to make cutting any angle fast, simple, and accurate.
Bora #ad - Fixed center molded Channel Reduces Blade Offset And Guesswork. Aluminum guide rails Position Your Saw Accurately Every Time. Quick-release clamps are adjustable So Your Saw Goes On And Off The Plate Effortlessly.
Bora #ad - Extreme durability: made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use.
Circular saw guide for large sheets: the bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw. For big projects, routers, easily increase the length up to 100 in.
Bora #ad - Solid design - with two "tongue and groove" Points that slide into the Bora clamp Edge's side grooves, it's a firm, steady guide for your Jigsaw.
Fully adjustable - the sliding side points and locking screw allow it to accommodate almost any size Jigsaw. An ideal woodworking accessory – made to use with our Bora Clamp edge range to help you achieve straight cuts with your Jigsaw.
Bora #ad - Can be used on right- or left-handed circular saws — no tools necessary to switch. For use with circular saws, routers, jig saws, and other portable power tools to achieve track saw like cuts.
Bora #ad - Adjustable to fit most Circular Saws. Tool free Saw Mounting. Compatible with all NGX & WTX Saw Guides. Accurate Cuts Every Time.
Bora #ad - Adds 50-inches to your existing NGX clamp edge guide. Fits into ngx clamp edge saw guide to increase length by 50 inches. Quick set up. Made of heavy-gauge, rigid aluminum for extreme durability. Includes connectors.
Bora #ad - Product 1: comeplete kit - the full set comes with the following accessories: 4 quick Clamps to keep your materials firmly in place, 4 X-shaped brackets which hold standard 2x4 boards steady, and a sturdy carry bag. Product 2: solid, secure hold: the strong quick clamping mechanism grips wood of varying thickness, so you can make angled cuts without worrying that your straight edge will come loose.
Easily tighten or adjust the clamp with the speed nut and lock it in place. The wider sizes allow you to complete 2 jobs at once.
Product 2: non-marking grip: each track clamp has rubberized feet that hold tight to your material without leaving damaging indentations. Product 1: versatile functionality - choose from 4 sizes, ck9s, ck12s and ck15s. Product 2: cut any angle: bora track clamps can be used with the WTX and NGX Clamp Edge Systems to make cutting any angle fast, simple, and accurate. It supports up to 6, 000 pounds of power tools and machinery. It’s expandable by simply adding risers not included for an increased working height.
1. Bora
#adNon-Chip Strip, BORA 5-Piece NGX Clamp Edge System Set for Making Precision Cuts, Pro Saw Plate, Includes 50-inch Clamp Edge, 544500, 50-inch Extension, Track Clamps
#adAttach it to the bottom of the NGX Clamp Edge for a smooth finish. And for big projects, increase the length up to 100 inches with the NGX 50” aluminum extension.
More information #ad
Track saw precision: making straight cuts with a circular saw, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, or jigsaw is a challenging task, router, accurate cuts every time. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts. 100” of cutting capacity: the ngx 50” clamp edge is made of heavy-gauge, like a rip cut on a 4x8, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber.
| Brand | Bora #ad |
| Manufacturer | Affinity Tool Works #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 10.09 Pounds |
| Width | 0 Inches |
| Part Number | 544500 |
| Model | 544500 |
More information #ad
2. Bora
#adStraight Cut Guide for Circular Saws, Includes 50-Inch Clamp Edge & 50-Inch Extension for 100-Inch Cutting Length, BORA 100" NGX Clamp Edge, 544100
#adMore information #ad
Includes bora ngx 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors. Clamping end moves with handle for easy adjustability from one side.| Brand | Bora #ad |
| Manufacturer | Bora #ad |
| Height | 0.75 Inches |
| Length | 100 Inches |
| Weight | 4 Pounds |
| Width | 3 Inches |
| Part Number | 544100 |
| Model | 544100 |
| Warranty | 1 year |
More information #ad
3. Bora
#adSaw Guide Accessory for Woodworking, Carpentry, 542011, Securely Cut Any Angle with WTX and NGX Clamp Edge Systems, Two-Pack, BORA Track Clamps, DIY
#adCut any angle: bora track clamps can be used with the WTX and NGX Clamp Edge Systems to make cutting any angle fast, simple, and accurate.
More information #ad
Solid, secure hold: the strong quick clamping mechanism grips wood of varying thickness, so you can make angled cuts without worrying that your straight edge will come loose. Easily tighten or adjust the clamp with the speed nut and lock it in place. Easy set up: attach the track clamp to the top or bottom of the rail for maximum grip.| Brand | Bora #ad |
| Manufacturer | Bora Portamate #ad |
| Height | 1 Inches |
| Length | 14 Inches |
| Weight | 0.5 Pounds |
| Width | 7 Inches |
| Part Number | 542011 |
| Model | 542011 |
| Warranty | 1 year |
More information #ad
4. Bora
#adDesigned for Straight Cuts While Using The NGX Clamp Edge System, 544001, Bora NGX Saw Plate Includes 55" Non-Chip Strip That Elimates Tear Out
#adMore information #ad
Self-adhesive non-chip strip attaches to the bottom Of Your Ngx Clamp Edge And Reduces Top Edge Tear-Out For A Smooth Finish.| Brand | Bora #ad |
| Manufacturer | PROOK #ad |
| Height | 19.5 Inches |
| Length | 11 Inches |
| Weight | 2 Pounds |
| Width | 2.5 Inches |
| Part Number | 544001 |
| Model | 544001 |
| Warranty | 1 year |
More information #ad
5. Bora
#adGreat for Cross-Cutting Plywood Sheets and Routing Dados, BORA 50” NGX Clamp Edge, Straight Cut Guide for Circular Saws, 544050, Easy to Use
#adCircular saw guide for large sheets: the bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw. For big projects, routers, easily increase the length up to 100 in.
More information #ad
Use it with circular saws, and jigsaws. By adding the bora NGX 50-inch aluminum extension. Clamps firmly: this straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project. Use with any circular saw: this guide is compatible with any brand of circular saw, not just Bora Tools.| Brand | Bora #ad |
| Manufacturer | Bora #ad |
| Height | 2 Inches |
| Length | 58 Inches |
| Weight | 2 Pounds |
| Width | 3 Inches |
| Part Number | 544050 |
| Model | 544050 |
| Warranty | 1 year |
More information #ad
6. Bora
#adBora Jigsaw Guide For WTX or NGX Clamp Edge. Use for making Straight Cuts & As A Steady Guide for your Jigsaw -542009
#adFully adjustable - the sliding side points and locking screw allow it to accommodate almost any size Jigsaw. An ideal woodworking accessory – made to use with our Bora Clamp edge range to help you achieve straight cuts with your Jigsaw.
More information #ad
Adjustable pointer guide keeps cuts true. Made for jigsaws - this jigsaw guide is specifically designed to fit most jigsaws. Easy to use - the jigsaw guide attaches easily to the Bora clamp edge, and your Jigsaw seamlessly fits into it, allowing for precise straight cuts.| Brand | Bora #ad |
| Manufacturer | PROOK #ad |
| Height | 2 Inches |
| Length | 8.5 Inches |
| Weight | 0 Pounds |
| Width | 5.5 Inches |
| Part Number | 542009 |
| Model | 542009 |
| Warranty | Manufacturer Warranty |
More information #ad
7. Bora
#adBORA 4-piece NGX Compact Set
#adMore information #ad
Includes 24" ngx clamp edge, rip handle, 25" NGX clamp edge extension with connectors, saw plate. Made of heavy-gauge, rigid aluminum for extreme durability.| Brand | Bora #ad |
| Manufacturer | Bora #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Width | 0 Inches |
| Part Number | 544300 |
| Model | 544300 |
| Warranty | Manufacturer Warranty |
More information #ad
8. Bora
#adBORA New NGX Saw Plate for WTX & NGX Clamp Edges, 546001
#adMore information #ad
| Brand | Bora #ad |
| Manufacturer | Affinity Tool Works #ad |
| Part Number | 546001 |
| Model | 546001 |
More information #ad
9. Bora
#adBORA 50" NGX Clamp Edge Extension, Straight Cut Guide for Circular Saws | Add 50-Inches to Your NGX Clamp Edge, 544060
#adMore information #ad
| Brand | Bora #ad |
| Manufacturer | Bora #ad |
| Height | 1.5 Inches |
| Length | 53 Inches |
| Weight | 2 Pounds |
| Width | 3 Inches |
| Part Number | 544060 |
| Model | 544060 |
| Warranty | 1 year |
More information #ad
10. Bora
#adSaw Guide Accessory for Woodworking, Securely Cut Any Angle w WTX and NGX Clamp Edge Systems, Bora Centipede 4x8 15-Strut Work Stand and Portable Table & Track Clamps, Carpentry, 542011, Two-Pack, DIY
#adEasily tighten or adjust the clamp with the speed nut and lock it in place. The wider sizes allow you to complete 2 jobs at once.
More information #ad
Product 2: easy set up: attach the track clamp to the top or bottom of the rail for maximum grip. Product 1: saw-horse solution - made of heavy duty steel construction, The centipede is a foldable work stand that can be set up as a large portable workbench at any job site. Product 2: non-marking grip: each track clamp has rubberized feet that hold tight to your material without leaving damaging indentations. Product 1: versatile functionality - choose from 4 sizes, ck9s, ck12s and ck15s. Product 2: cut any angle: bora track clamps can be used with the WTX and NGX Clamp Edge Systems to make cutting any angle fast, simple, and accurate. It supports up to 6, 000 pounds of power tools and machinery. It’s expandable by simply adding risers not included for an increased working height.
| Brand | Bora #ad |
| Manufacturer | Bora #ad |
More information #ad
