Pentek 158002 3/8″ #5 Slim Line Blue Filter Housing with Pressure Relief


Pentair Industries 3/8" #5 BL & BLK W/PR - Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. This filter housing meets food and drug administration FDA standards, and is for use in various applications, and humidifying systems, including residential drinking water filtration, food service, among others.

Specifications filter cartridge size H x W sold separately 5 x 2-1/2 inches 127 x 63. 5 mm initial pressure drop at 3 gpm 2 psi Maximum temperature 125 degrees F 51. 7 degrees c maximum pressure 125 psi maximum dimensions h x w 7 x 4-3/8 inches 178 x 111 mmH is height, the horizontal distance from left to right; D is depth, the vertical distance from lowest to highest point; W is width, the horizontal distance from front to back.

Pentek 158002 3/8" #5 Slim Line Blue Filter Housing with Pressure Relief - Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. The performance of filters is measured by the minimum particle size that is blocked, the maximum flow rate, the downstream concentration of unwanted chemicals, the percentage of particles or microorganisms that are removed, and the amount of water that can be filtered before the filter must be replaced.

Pressure relief button for easier cartridge replacement. This pentek 158002 3/8" #5 slim line blue filter housing with pressure relief is suitable for low flow rate applications that have space restrictions. It has an initial pressure drop of 2 pounds per square inch psi at a flow rate of 3 gallons per minute gpm, a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F 51.

More information about Pentair Industries 3/8" #5 BL & BLK W/PR

Pentek C2 Carbon-Impregnated Cellulose Filter Cartridge, 4-7/8" x 2-1/2", 5 Micron


Pentair Industries C2 - Reduces fine sediment and chlorine taste and odor in residential drinking water. This filter cartridge is for use in residential drinking water purification. Specifications nominal filtration rating 5 microns Initial pressure drop at 2 gpm 2 psi Chlorine reduction capacity 1, 250 gallons at 05 gpm operating temperature range 40 to 125 degrees F 4.

4 to 51. 7 degrees c maximum dimensions h x w 4-78 x 2-1/2 inches 124 x 64 mmThe nominal filtration rating is for a particle removal efficiency of 85%. Water filters are used in a wide range of applications, and irrigation, industrial processes, swimming pools, including drinking water purification, among others.

Pentek C2 Carbon-Impregnated Cellulose Filter Cartridge, 4-7/8" x 2-1/2", 5 Micron - Pentair manufactures industrial, commercial, and residential water filtration components and systems. This pentek c2 carbon-impregnated cellulose filter cartridge reduces fine sediment and chlorine taste and odor in residential drinking water. It has an initial pressure drop of 1 pound per square inch psi at a flow rate of 5 gallons per minute gpm, and operates over a temperature range of 40 to 125 degrees F 4.

4 to 51. 7 degrees C. Initial pressure drop of 2 psi at a flow rate of 2 gpm. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance.

More information about Pentair Industries C2


Similar products



Pentek CBC-5 Carbon Block Filter Cartridge, 40 to 180 degrees F


Pentek CBC-5 - Nominal filtration rating of 5 microns. The pentek cbc-10 carbon filter cartridge reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water. Reduces fine sediment and chlorine taste and odor in residential drinking water. Temperature range of 40 to 125 degrees F 4.

4 to 51. 7 degrees C. Carbon-impregnated cellulose media with a polyester backing and external polyethylene netting for strength. Filtration Rating: 05 micron. Initial pressure drop of 2 psi at a flow rate of 2 gpm. Product demensions: 9-3/4 x 2-7/8" 248 x 73 mm. Capacity: 20, 000 gallons at 2 gpm. The product is rated to.

Pentek CBC-5 Carbon Block Filter Cartridge, 40 to 180 degrees F - 5 microns, has a flowrate of 2 gallons per minute and meets NSF/ANSI standard 42 for purification of commercial and residential water. Temperature range: 40 to 180 degrees F.

More information about Pentek CBC-5


Similar products



Pentek 158110 3/8" #5 Slim Line Clear Filter Housing


Pentair Industries 3/8"#5 CL & BL W/PR 12/ - Reduces fine sediment and chlorine taste and odor in residential drinking water. Use with a 5" x 2-1/2" sediment or carbon filter cartridge sold separately. Clear styrene-acrylonitrile SAN for on-site viewing of flow and cartridge condition. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization.

The cap has 3/8" female national pipe thread Taper NPT threaded input and output connections and a nitrile butadiene rubber Buna-N O-ring to ensure a watertight seal. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance.

Pentek 158110 3/8" #5 Slim Line Clear Filter Housing - This filter housing is for use in various applications, food service, including residential drinking water filtration, and humidifying systems, among others. Specifications filter cartridge size H x W sold separately 5 x 2-1/2 inches 127 x 63. 5 mm initial pressure drop at 5 gpm 2 psi Maximum temperature 125 degrees F 51.

7 degrees c maximum pressure 125 psi maximum dimensions h x w 7-3/8 x 4-5/8 inches 187 x 118 mmH is height, the horizontal distance from left to right; D is depth, the vertical distance from lowest to highest point; W is width, the horizontal distance from front to back. Water filters remove undesirable particles, and microorganisms from water by means of a semipermeable barrier, chemicals, adsorption, or biological processes.

It has an initial pressure drop of 2 pounds per square inch psi at a flow rate of 5 gallons per minute gpm, a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F 51.

More information about Pentair Industries 3/8"#5 CL & BL W/PR 12/


Similar products



Pentek P5-478 Spun Polypropylene Filter Cartridge, 4-7/8" x 2-3/8", 5 Microns


Pentair Industries P5-478 - Filtration Rating: 05 micron. Temperature range: 40 to 180 degrees F. Nominal filtration rating of 5 microns. Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.

This spun polypropylene filter cartridge is used for treatment of residential, commercial, and municipal drinking water. SpecificationsNominal filtration rating5 micronsInitial pressure drop at 2 gpm03 psitemperature range40 to 145 degrees F 4. 4 to 62. 8 degrees cmaximum dimensions h x w4-7/8 x 2-3/8 inches 124 x 60 mmThe nominal filtration rating is for a particle removal efficiency of 85%.

Pentek P5-478 Spun Polypropylene Filter Cartridge, 4-7/8" x 2-3/8", 5 Microns - H is height, the horizontal distance from left to right; D is depth, the vertical distance from lowest to highest point; W is width, the horizontal distance from front to back. Water filters remove undesirable particles, chemicals, adsorption, and microorganisms from water by means of a semipermeable barrier, or biological processes.

The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. Slim filter housing for low-flow applications with space restrictions. Maximum temperature of 125 degrees F 51. 7 degrees C.

More information about Pentair Industries P5-478


Similar products



Pentek 244047 Mounting Bracket Kit for 1/4", 3/8" and 1/2" Housings


Pentek 244047 - Use with a 5" x 2-1/2" sediment or carbon filter cartridge sold separately. Nominal filtration rating of 5 microns. Maximum temperature of 125 degrees F 51. 7 degrees C. Carbon-impregnated cellulose media with a polyester backing and external polyethylene netting for strength. Genuine OEM. Capacity: 20, 000 gallons at 2 gpm.

Initial pressure drop of 2 psi at a flow rate of 5 gpm. Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Zinc plated steel for inside applications. The pentek 244047 is a mounting bracket used with the Slim Line Housings by Pentek. Initial pressure drop of 2 psi at a flow rate of 2 gpm. Slim filter housing for low-flow applications with space restrictions.

Pentek 244047 Mounting Bracket Kit for 1/4", 3/8" and 1/2" Housings - Reduces sand, scale, and rust particles in residential, commercial, silt, and municipal drinking water. Nominal filtration rating of 5 microns. Initial pressure drop of 03 psi at a flow rate of 2 gpm. Product demensions: 9-3/4 x 2-7/8" 248 x 73 mm.

More information about Pentek 244047


Similar products



Pentek 150539 SW-1 Wrench for Slim Line Housings


Pentair Industries 150539 - Initial pressure drop of 2 psi at a flow rate of 2 gpm. Maximum temperature of 125 degrees F 51. 7 degrees C. Use with a 5" x 2-1/2" sediment or carbon filter cartridge sold separately. Reduces fine sediment and chlorine taste and odor in residential drinking water. Mounting bracket allows for the mounting of Pentek slim line water filter housings.

Spun polypropylene for resistance to chemicals and bacteria. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced.

Pentek 150539 SW-1 Wrench for Slim Line Housings - Carbon-impregnated cellulose media with a polyester backing and external polyethylene netting for strength. Initial pressure drop of 2 psi at a flow rate of 5 gpm. This pentek 150539 sw-1a previously SW-1 wrench is used to loosen the sumps of water filter housings. This wrench fits the sumps of pentek slim Line filter housings, and industrial processes, which are used in a wide variety of applications, irrigation, including drinking water purification, among others.

Water filters remove undesirable particles, and microorganisms from water by means of a semipermeable barrier, chemicals, adsorption, or biological processes. Clear styrene-acrylonitrile SAN for on-site viewing of flow and cartridge condition. Wrench for loosening filter housing sumps.

More information about Pentair Industries 150539


Similar products



Pentek EP-5 Carbon Block Filter Cartridge, 4-7/8" x 2-7/8", 5 Microns


Pentair Industries EP-5 - It has a nominal 85% filtration rating of 5 microns, and a recommended flow rate of 2 gallons per minute gpm. Genuine OEM. The company, mn, founded in 1966 and headquartered in Minneapolis, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. Mounting bracket allows for the mounting of Pentek slim line water filter housings.

Use with a 5" x 2-1/2" sediment or carbon filter cartridge sold separately. Reduces fine sediment and chlorine taste and odor in residential drinking water. Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants.

Pentek EP-5 Carbon Block Filter Cartridge, 4-7/8" x 2-7/8", 5 Microns - This carbon block filter cartridge is used for purification of residential and commercial drinking water. Specificationsnominal filtration rating5 micronsRecommended flow rate2 gpmChlorine reduction capacity1, 500 gallons at 2 gpmTemperature range40 to 180 degrees F 4. 4 to 82. 2 degrees cmaximum dimensions h x w4-7/8 x 2-7/8 inches 124 x 73 mmThe nominal filtration rating is for a particle removal efficiency of 85%.

Made of strong plastic. The cartridge operates over a temperature range of 40 to 180 degrees F 4.

More information about Pentair Industries EP-5


Similar products