Neewer 39″/1m Carbon Fiber Camera Track Dolly Slider Rail System with 17.5lbs/8kg Load Capacity for Stabilizing Photograph Movie Film Video Making DSLR Camera Nikon Canon Pentax Sony


Neewer 10086288 - Height of legs could be adjusted from 105cm to 13. 5cm! what a wonderful slider plate! Universal slider plate with a 1/4 threaded hole to hold most DSLR cameras. Even comes with a 1/4 to 3/8 screw Locking knob aside to lock down the slider plate! Partly hollowed out for more scientific way to load. Gear-shaped joint interface and locking knobs for better position locking.

Forur threaded holes in slider plate to mount other accessories such as magic arms to enrich your photo quality! Such useful legs! Foldable legs for less a burden, easier portability and quicker set up time! Leg position is adjustable in large scale for demanding filming task. Five threaded holes in fixed plate to mount tripod for horizontal and even 45-degree shooting.

Neewer 39"/1m Carbon Fiber Camera Track Dolly Slider Rail System with 17.5lbs/8kg Load Capacity for Stabilizing Photograph Movie Film Video Making DSLR Camera Nikon Canon Pentax Sony - ? Round rubber pad to avoid scratches to your camera's bottom. So many threaded holes! Two threaded holes at each end of the track to mount tripod for vertical shooting. Camera, tripod head, ball head and Tripod are Not Included. This track dolly is here to help you out! we upgrade the product with U-shaped ball bearings under the slider part to ensure both smooth motion and minimum abrasion on high-grade carbon fiber tubes, that's how it achieves stability and quietness when used to filming.

Note: Slider Only. Description: envy of those smooth movements and professional feeling in those videos.

More information about Neewer 10086288

DMKFoto Heavy Duty Ball Head with Quick Release Plate


DMKFoto 1550 - Single lever control for quick action. Additional QR plate available. Base has a 3/8" screw thread for universal mounting to tripods and monopods. Smooth 360 degree movement. Load capacity: 9 lbs. Professional ball head with quick release. The quick release plate has a 1/4" screw for all cameras. If your pod has a 1/4" screw, we can provide step-up adapter to make it fit.

More information about DMKFoto 1550


Similar products



Neewer Professional Metal 360 Degree Rotating Panoramic Ball Head with 1/4 inch Quick Shoe Plate and Bubble Level,up to 17.6pounds/8kilograms,for Tripod,Monopod,Slider,DSLR Camera,Camcorder


Neewer 78088671 - Both horizontal and vertical bubble level to enhance perception of position. 3/8" screw mount at the bottom enable connection of most type of tripod or light stand 360 Degrees Swivel, equipped with 3 knobs for adjustment, you are able to set your camera at different angle. Note: tripod head Only; Camera and tripod are not included.

360 degree swivel: equipped with 3 knobs for adjustment, you are able to set your camera at different angle. With fine tuning damping to protect your device from sudden plunge while doing versatile angle shooting. Specifications: material: metal quick shoe Plate: 1/4" Bottom Screw Thread: 3/8" Load Capacity: 17.

Neewer Professional Metal 360 Degree Rotating Panoramic Ball Head with 1/4 inch Quick Shoe Plate and Bubble Level,up to 17.6pounds/8kilograms,for Tripod,Monopod,Slider,DSLR Camera,Camcorder - 6lbs/8kg package content: 1 x Tripod Ball Head Professional ball head with quick release. Smooth ball joint for versatile angle moving. The base with index marking to indicate more precise control. Easy to set up in seconds. Load capacity: 9 lbs. Single lever control for quick action. Note: tripod head only; camera and tripod are not included Descriptions: Quick shoe plate with 1/4" screw.

. Comes with 3/8'' bottom screw thread; You can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing.

More information about Neewer 78088671


Similar products



GkGk G06 Tripod Pan Head, 360 Degrees Smooth Rotation Hydraulic Damping Three-Dimensional Aluminum Alloy Tilt Head with Quick Release Plate for Tripod, Monopod, Slider, DSLR Camera, Camcorder


GkGk 4331909150 - Provides tight locking force to ensure the stabilization and safety while you take pictures. Single lever control for quick action. The base with index marking to indicate more precise control. It's able to withstand heavy loads, plus, it locks effectively and moves smoothly to allow for precise adjustments on the go.

Unbelievably strong and durable: the g06 pan head is made of durable aluminum alloy, so it can bear max up to 12 kg of weight! This means that it is ideal for almost any type of camera device on the market. Load capacity: 9 lbs. Add the g06 tilt head to your cart and be ready to take some amazing pictures in the most hassle-free way! Mount The Camera Or Tripod Of Your Choice! Doesn't matter what your photography project requires; this aluminum alloy tilt head has you covered.

GkGk G06 Tripod Pan Head, 360 Degrees Smooth Rotation Hydraulic Damping Three-Dimensional Aluminum Alloy Tilt Head with Quick Release Plate for Tripod, Monopod, Slider, DSLR Camera, Camcorder - 360 degrees fluid smooth rotation: the tripod tilt head support allows your camera to rotate 360 degrees horizontally and 180 degrees vertically, and it can be fitted with a large VCR and a telephoto lens. Plus, it can be fitted with a large VCR and a telephoto lens for matchless convenience and an incredibly easy shooting experience.

Note: tripod head Only; Camera and tripod are not included. Must-have photography gear: whether photography is your profession or simply a hobby, The ultra-light head will allow you capturing beautiful moments and sceneries more ease. Comes with 3/8'' bottom screw thread; You can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing.

More information about GkGk 4331909150


Similar products



Meco VT-1510 Tripod Action Fluid Drag Head Video Camera


WAAO VT-1510 - Must-have photography gear: whether photography is your profession or simply a hobby, The ultra-light head will allow you capturing beautiful moments and sceneries more ease. Sliding quick release plate with 1/4" screw thread Fluid drag system provide smooth consistent tilt and pan controls. Comes with 3/8'' bottom screw thread; You can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing.

Note: tripod head Only; Camera and tripod are not included. It will literally untie your hands and make adjustments without breaking a sweat. It allows a -85 degree/+90 degree angle tilt. Compatible with all dslrcannon, Nikon, Kodak, Tripods and slider rail, panasonic, Camcorders, Sony, Samsung, etc. Etc. Built-in bubble horizontal leveling indicator.

Meco VT-1510 Tripod Action Fluid Drag Head Video Camera - Universal compatibility with most tripods: equipped with a quick release plate and 2Pcs 1/4" to 3/8" Convert Screw Adapter, Make it easy to install the tilt head to various tripods and it is suitable for most DSLR cameras and. Absolutely essential for outdoor travelling photographers. 360 degree swivel: equipped with 3 knobs for adjustment, you are able to set your camera at different angle.

The built-in counterbalance system comprised of a sliding camera platform, optimizing tilt control. Tripod screw mount: 3/8" or 1/4" screw thread.

More information about WAAO VT-1510


Similar products



Video Tripod System, Cayer BV30L 72 inch- Professional Heavy Duty Aluminum Twin Tube Tripod, K3 Fluid Head, Mid-Level Spreader, Max Loading 13.2 LB, DSLR Camcorder, Plus 1 Bonus Quick Release Plate


Cayer BV30L - 360 degrees fluid smooth rotation: the tripod tilt head support allows your camera to rotate 360 degrees horizontally and 180 degrees vertically, and it can be fitted with a large VCR and a telephoto lens. Tripod screw mount: 3/8" or 1/4" screw thread. Must-have photography gear: whether photography is your profession or simply a hobby, The ultra-light head will allow you capturing beautiful moments and sceneries more ease.

Compatible with all dslrcannon, Camcorders, panasonic, Samsung, Tripods and slider rail, Sony, Kodak, Nikon, etc. Etc. Built-in bubble horizontal leveling indicator. 2-way fluid head features fixed counter balance, and tilt drag with a fixed-length detached pan bar, pan, offers 360° panning and +90° / -70° tilt; Integrated Flat Base with 3/8"-16 Thread.

Video Tripod System, Cayer BV30L 72 inch- Professional Heavy Duty Aluminum Twin Tube Tripod, K3 Fluid Head, Mid-Level Spreader, Max Loading 13.2 LB, DSLR Camcorder, Plus 1 Bonus Quick Release Plate - Two provided quick release plates, and a 3/8"-16 screw stored in a thread under the plate, each comes with a 1/4"-20 screw, offers a sliding range of +20/-25mm - to enable travel capabilities. Featuring locking rubber buckles, this 2-stage fluid head tripod with a built-in 75mm bowl; mid-level spreader provides enhanced stability by holding the tripod legs in locked position.

Limited 8-year warranty | 13. 2 lb load capacity | 33" to 72" height range | tilt angle +90° / -70° | 360° panning | 75mm Ball Diameter | Carrying Bag | Fluid Head | Tripod Leg | 2 pcs of Quick Release Plates. Capable of supporting up to 13. 2 lb, the bv30l provides a professional tripod system solution.

More information about Cayer BV30L


Similar products



Translucent, Silver, Gold, White and Black - Neewer 43-inch / 110cm 5-in-1 Collapsible Multi-Disc Light Reflector with Bag


Neewer 10000076 - 100% brand new! 3 months Warranty By Seller. It will literally untie your hands and make adjustments without breaking a sweat. Professional ball head with quick release. Smooth 360 degree movement. It is not as bright as the silver side so you can get closer to your subject. The black side just the opposite and is used to subtract light and create shadows in certain areas.

Using diffusers:in the middle of the frame is a translucent material which is used as a diffuser. This side is usually held directly above the subject to soften the sun’s natural light. It will always go between the light source and the subject. Note: tripod head Only; Camera and tripod are not included. 360 degrees fluid smooth rotation: the tripod tilt head support allows your camera to rotate 360 degrees horizontally and 180 degrees vertically, and it can be fitted with a large VCR and a telephoto lens.

Translucent, Silver, Gold, White and Black - Neewer 43-inch / 110cm 5-in-1 Collapsible Multi-Disc Light Reflector with Bag - Single lever control for quick action. Load capacity: 9 lbs. Limited 8-year warranty | 13. 2 lb load capacity | 33" to 72" height range | tilt angle +90° / -70° | 360° panning | 75mm Ball Diameter | Carrying Bag | Fluid Head | Tripod Leg | 2 pcs of Quick Release Plates. The base with index marking to indicate more precise control.

More information about Neewer 10000076


Similar products



Fluid Head, Kamisafe KINGJOY VT-3510 Heavy Duty Video Camera Tripod Fluid Drag Pan Head with 1/4" 3/8" Screws Sliding Plate for DSLR Camera Video Camcorder Shooting Filming, Load up to 11lbs/5kg


KAMISAFE 3510 - Note: tripod head Only; Camera and tripod are not included. Quick release: Yes. 360 degrees fluid smooth rotation: the tripod tilt head support allows your camera to rotate 360 degrees horizontally and 180 degrees vertically, and it can be fitted with a large VCR and a telephoto lens. 360 degree swivel: equipped with 3 knobs for adjustment, you are able to set your camera at different angle.

Universal compatibility with most tripods: equipped with a quick release plate and 2Pcs 1/4" to 3/8" Convert Screw Adapter, Make it easy to install the tilt head to various tripods and it is suitable for most DSLR cameras and. Absolutely essential for outdoor travelling photographers. Specifications - Model: VT-3510

Fluid Head, Kamisafe KINGJOY VT-3510 Heavy Duty Video Camera Tripod Fluid Drag Pan Head with 1/4" 3/8" Screws Sliding Plate for DSLR Camera Video Camcorder Shooting Filming, Load up to 11lbs/5kg - Wearable and non-skid bar design: The wearable and non-skid bar design can prevent the shooting from shaking to improve the stability. Translucent, gold, white, silver, and black. This reflector fits any standard reflector holders. It smoothly pans 360-degree and tilts 180-degree and comes with a removable, right-sided pan arm and 3/8" & 1/4" quick release plate.

It will literally untie your hands and make adjustments without breaking a sweat. Provides tight locking force to ensure the stabilization and safety while you take pictures. And it has a sliding plate which travels to balance the latest interchangeable lens cameras.

More information about KAMISAFE 3510


Similar products



SMALLRIG Cool Ballhead Arm Super Clamp Mount Multi-Function Double Ball Adapter with Bottom Clamp for Ronin-M, Ronin MX, Freefly MOVI - 1138


SMALLRIG 1138 - Supports 13. 2 lb, a professional video tripod system designed for HDSLR and interchangeable lens cameras. It can lock the rod on the cage via the clamp tightened by the locking knob. Other: the side lock system allows the camera and sliding QR plate to click quickly into the head from above, instead of needing to be aligned and slid in from the back.

Smallrig multi-function double ballhead 1138 is a multifunctional double ball head with a clamp at the bottom and a 1/4" screw on the top. It can mount monitor and led lights on the one end via 1/4'' screw, and it can lock the rod on the cage via the clamp tightened by the locking knob. It could be attached and detached from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting.

SMALLRIG Cool Ballhead Arm Super Clamp Mount Multi-Function Double Ball Adapter with Bottom Clamp for Ronin-M, Ronin MX, Freefly MOVI - 1138 - The rod clamp fits dji ronin & freefly movI Pro & all 30mm rods and can also be adjusted with ease. The best load < 1. 21kg. Universal compatibility with most tripods: equipped with a quick release plate and 2Pcs 1/4" to 3/8" Convert Screw Adapter, Make it easy to install the tilt head to various tripods and it is suitable for most DSLR cameras and.

Absolutely essential for outdoor travelling photographers. The rod clamp fits dji ronin & freefly moVI Pro & all 30mm rods and can also be adjusted with ease. 4.

More information about SMALLRIG 1138


Similar products



NP-F550 RAVPower Battery Charger for Sony NP F970, F750, F770, F960, F550, F530, F330, F570, CCD-SC55, TR516, TR716, TR818, TR910, TR917 and more 2-Pack Replacement Battery Kit, Dual Slot Charger


RAVPower US-RP-BC006-011 - Kindly note: the wall charger, car charger, car charger and power bank are not included in the package. Record for longer with your video camera: Shoot videos for up to 3. 5-4 hours per battery while others last for barely 2 hours. Record for longer with your video camera raVPower Replacement Batteries feature a higher-density 2900mAh capacity that ups the 2200mAh of the original.

Single lever control for quick action. Package contents: 2 x 2900mah replacement batteries for sony np-F5501 x DC Dual Battery Charger 1 x micro-USB Cable 1 x Warranty Card Professional ball head with quick release. Note: tripod head Only; Camera and tripod are not included. With fine tuning damping to protect your device from sudden plunge while doing versatile angle shooting.

NP-F550 RAVPower Battery Charger for Sony NP F970, F750, F770, F960, F550, F530, F330, F570, CCD-SC55, TR516, TR716, TR818, TR910, TR917 and more 2-Pack Replacement Battery Kit, Dual Slot Charger - Compatible with all dslrcannon, Samsung, panasonic, Tripods and slider rail, Sony, Camcorders, Kodak, Nikon, etc. Etc. Built-in bubble horizontal leveling indicator. Supports 13. 2 lb, a professional video tripod system designed for HDSLR and interchangeable lens cameras. 2 fully compatible extra batteries: two replacement batteries with a bigger capacity of 2900mAh/20

88wh, and a dual slot charger keep your Sony camera ready to shoot.

More information about RAVPower US-RP-BC006-011


Similar products



Delkin DDMNT-TRIPLE Fat Gecko Three-Arm Suction Mount Black


Delkin DDMNT-TRIPLE - 1/4" quick shoe plate; easy to set up in seconds, it has both horizontal and vertical bubble level to enhance perception of position. The base with index marking to indicate more precise control. The 3-arm mount couples a fat gecko original with a Fat Gecko Mini and creates a 3-point mount for increased stability on moving objects or in harsh conditions.

100% brand new! 3 months Warranty By Seller. Note: the vt-3510 is not compatible with manfrotto and djI plates, and it supports adjustable shooting angel, 360 degree horizontally and -70 to 90 degree vertically, providing a wide range of shooting horizons. Quick release plate: comes with a dual convertible 1/4"- 3/8" mounting screws to be fit for most video shooting; Standard 3/8 inches threaded screw hole on the bottom included with a 3/8 inches to 1/4 inch screw adapter, making it suitable for all tripods, monopods, light stands and camera sliders.

Delkin DDMNT-TRIPLE Fat Gecko Three-Arm Suction Mount Black - Removable handle: it comes with a right-sided non-skid handle bar, which can be removed and installed to the left side according to your request. Bubble level: security locking knob can well prevent the equipment from falling off accidentally, and professional bubble levels help to keep the stable shooting to adapt to different environments.

Other: the side lock system allows the camera and sliding QR plate to click quickly into the head from above, instead of needing to be aligned and slid in from the back. Smallrig multi-function double ballhead 1138 is a multifunctional double ball head with a clamp at the bottom and a 1/4" screw on the top.

It can mount monitor and led lights on the one end via 1/4'' screw, and it can lock the rod on the cage via the clamp tightened by the locking knob. It could be attached and detached from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting.

More information about Delkin DDMNT-TRIPLE


Similar products