HFS Ultra Precision 1-2-3″ Blocks 2pcs/pair , 0.0001″ Plastic Case


HardwareFactoryStore.com - Product description Size within +/-. 0001" flatness and parallelism within. 0001" accuracy and squareness on all sides within. 0001"-. 0002" pairs are matched to a tolerance of 00002" product application Used for set-up. Flatness and parallelism within. 0001". Squareness on all sides is 00003" per inch. Used for set-up, layout and inspection jobs.

Pairs are matched to a tolerance of 00001". Layout and inspection jobs product features has 23 holes with 5 holes tap to 3/8-16 threads for clamping and 18 untapped holes Made of hardened tool steel and precision ground on all six sides Cross drilling design allows efficient use of lower weight with maximum strength Heat treat and hardness 56 to 60 RC 2 pieces per set Weight: 2.

HFS Ultra Precision 1-2-3" Blocks 2pcs/pair , 0.0001" Plastic Case - 1 lbs size within +/-. 0001".

More information about HardwareFactoryStore.com

Mitutoyo 050101, Edge Finder, 3/8" Dia. Shank, .200" Dia. Tip


Mitutoyo 50101 - All working surfaces are hardened and ground. Mitutoyo edge finder, shank Dia: 3/8", Tip Dia:. 200". Used in a milling machine to find the workpiece edge.

More information about Mitutoyo 50101


Similar products



Anytime Tools Angle Block Set 30-60-90 & 45-45-90 Precision +/- 20 Seconds, Machinist Tool, 2 Piece Set


Anytime Tools - Precision-ground, steel construction. All working surfaces are hardened and ground. Professional grade precision Tool Angle blocks are a valuable tool for the alignment and measurement of precise angles. They can also be stacked to create other angles. Set contains two angle blocks: one 30°-60°-90° degree block and one 45°-45°-90° degree block.

Features: set contains two angle blocks, one 30°-60°-90° degree block and one 45°-45°-90° degree blockAccuracy +/-20 seconds, 00001" per inch. High precision: +/- 20 seconds, 00001" per inch. Precision Ground Solid Hardened Steel. Hardened steel rockwell hrc 55 3" long x 1/4" thick Includes padded fitted case Used in a milling machine to find the workpiece edge.

Anytime Tools Angle Block Set 30-60-90 & 45-45-90 Precision +/- 20 Seconds, Machinist Tool, 2 Piece Set - Thickness 025".

More information about Anytime Tools


Similar products



Mitutoyo 050103, Edge/Center Finder, 3/8" Diameter Shank, 0.200" Diameter Tip


Mitutoyo 50103 - Used in a milling machine to find the workpiece edge. Mitutoyo edge/center Finder with 3/8" Shank Diameter, 0200" tip diameter, and cone-shaped center finder. Precision Ground Solid Hardened Steel. High precision: +/- 20 seconds, 00001" per inch. Set contains two angle blocks: one 30°-60°-90° degree block and one 45°-45°-90° degree block.

Used in a milling machine to find the workpiece edge. All working surfaces are hardened and ground. All working surfaces are hardened and ground. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. Thickness 025".

More information about Mitutoyo 50103


Similar products



7/8" Mill Chuck Holder for Bridgeport .0006 - 13pcs Precision R8 Collets Set 1/8


Genenic - Accuracy. 0006" tir. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. Used in a milling machine to find the workpiece edge. Set contains two angle blocks: one 30°-60°-90° degree block and one 45°-45°-90° degree block. High precision: +/- 20 seconds, 0

0001" per inch. Hardened and ground throughout. All working surfaces are hardened and ground. Drawbar thread: 7/16"-20 Size: 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8". Thickness 025". Used in a milling machine to find the workpiece edge. Precision ground to close tolerance. Item description: size: 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8" Accuracy.

7/8" Mill Chuck Holder for Bridgeport .0006 - 13pcs Precision R8 Collets Set 1/8 - 0006" tir drawbar thread: 7/16"-20 material:65mn hardness:clamping part hrc 55-60 elastic part HRC 40-45 Applicable:This unit is applicable to all sorts of milling machines, which spindle taper hole is R8. Precision Ground Solid Hardened Steel. All working surfaces are hardened and ground.

More information about Genenic


Similar products



HFS R Hold Down Clamp Clamping Set Kit Bridgeport Mill 5/8"Slot 1/2" Stud


HFS - Hardened and ground throughout. All working surfaces are hardened and ground. All working surfaces are hardened and ground. High precision: +/- 20 seconds, 00001" per inch. Used in a milling machine to find the workpiece edge. Used in a milling machine to find the workpiece edge. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line.

Thickness 025". Drawbar thread: 7/16"-20 Accuracy. 0006" tir. Set contains two angle blocks: one 30°-60°-90° degree block and one 45°-45°-90° degree block. Precision ground to close tolerance. Size: 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8". Precision Ground Solid Hardened Steel.

More information about HFS


Similar products



Accusize Industrial Tools 81 Pcs Steel Gauge Block Set, Grade B, P900-S581


Accusize Co., Ltd. P900-S581 - Precision ground to close tolerance. 20 c. All gage block sets are assigned serial numbers and accompanied with a certificate of inspection listing the deviation for each block. Each gage block set meets or exceeds federal specification ASME B89. 1. 9-2002. Hardened to hrc 64 / all gage block sets are made to special standard to resist corrosion and defacement.

Hardened and ground throughout. Precision Ground Solid Hardened Steel. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. Used in a milling machine to find the workpiece edge. Manufactured under carefully controlled conditions allowing for the highest degree of accuracy when used at a temperature of 68 degrees F 20 degree C Used in a milling machine to find the workpiece edge.

Accusize Industrial Tools 81 Pcs Steel Gauge Block Set, Grade B, P900-S581 - All working surfaces are hardened and ground. 81 pc grade b steel gage Block Set with MFG'S certificate. Accuracy. 0006" tir. All working surfaces are hardened and ground. Manufactured under carefully controlled conditions allowing for the highest degrees of accuracy when used at a temperature of 68 degrees F.

More information about Accusize Co., Ltd. P900-S581


Similar products



Anytime Tools 5 Center Drill Countersink Lathe Bit Mill Tooling Set


Anytime Tools AT200536 - Used in a milling machine to find the workpiece edge. Used in a milling machine to find the workpiece edge. Drawbar thread: 7/16"-20 All working surfaces are hardened and ground. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes. Each gage block set meets or exceeds federal specification ASME B89.

1. 9-2002. Hardened to hrc 64 / all gage block sets are made to special standard to resist corrosion and defacement. Precision ground to close tolerance. 81 pc grade b steel gage Block Set with MFG'S certificate. Set contains two angle blocks: one 30°-60°-90° degree block and one 45°-45°-90° degree block.

Anytime Tools 5 Center Drill Countersink Lathe Bit Mill Tooling Set - Top quality M2 HSS. Sizes 1, 4 and 5, 3, 2, 60° tip angles. Size: 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 13/16" 7/8". Manufactured under carefully controlled conditions allowing for the highest degrees of accuracy when used at a temperature of 68 degrees F. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line.

Hardened and ground throughout. 20 c.

More information about Anytime Tools AT200536


Similar products



1/2in to 1-5/8in Block Pairs - ABN Machinist Thin Parallel Bars 20-Piece Tool Set 1/8in x 6in - Straightedge Bar Blocks


ABN - Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. Top quality M2 HSS. Drawbar thread: 7/16"-20 High precision: +/- 20 seconds, 00001" per inch. They are made from solid steel and come individually wrapped in pairs and pre-oiled for rust-resistance. 81 pc grade b steel gage Block Set with MFG'S certificate.

Manufactured under carefully controlled conditions allowing for the highest degrees of accuracy when used at a temperature of 68 degrees F. Each gage block set meets or exceeds federal specification ASME B89. 1. 9-2002. Hardened to hrc 64 / all gage block sets are made to special standard to resist corrosion and defacement.

1/2in to 1-5/8in Block Pairs - ABN Machinist Thin Parallel Bars 20-Piece Tool Set 1/8in x 6in - Straightedge Bar Blocks - Various sizes: this package includes 10 pairs of 1/8-inch x 6-inch 03cm x 15. 2cm parallel bars with the following heights: 1/2-inch, 1-1/8-inch, 7/8-inch, 1-3/8-inch, 1-1/4-inch, 1-inch, 5/8-inch, 3/4-inch, 1-1/2-inch, and 1-5/8-inch; Permanently laser-etched size in standard SAE inches on each parallel; The 2 holes on each individual bar are 4 inches 10.

2cm apart from center to center with the diameter incrementing in 1/8-inch from 1/2-inch to 1-5/8-inch. Built to last: constructed from solid steel that is stress relieved against distortion as well as precision ground and hardened for ultimate strength and longevity; Bars come individually wrapped in pairs and are pre-oiled for a long-lasting life and rust-resistance we recommend reapplying oil after use.

Package contents: package contains 20 parallel bars - 2 of each size and 1 storage case for your convenience.

More information about ABN


Similar products



Grizzly H5608 V-Block Pair with Clamps 1-5/8-Inch


Grizzly H5608 - 81 pc grade b steel gage Block Set with MFG'S certificate. Each gage block set meets or exceeds federal specification ASME B89. 1. 9-2002. Hardened to hrc 64 / all gage block sets are made to special standard to resist corrosion and defacement. Numbered and matched pairs are precision ground for accuracy. Precision Ground Solid Hardened Steel.

20 c. All gage block sets are assigned serial numbers and accompanied with a certificate of inspection listing the deviation for each block. Sizes 1, 3, 4 and 5, 2, 60° tip angles. Precise machining: use the abn machinist thin parallel bars 20-piece tool set 1/8" x 6" Inch - Straightedge Bar Blocks - 1/2" to 1-5/8" Block Pairs for any machining, especially smaller workpieces; Use on a jig or drill press for milling work and other projects.

Grizzly H5608 V-Block Pair with Clamps 1-5/8-Inch - 1 5/8" x 1 1/4" x 1 1/4". Easy storage: heavy-duty 8. 5" x 7. 1" x 2. 4" inch 21. 6cm x 18cm x 6. 1cm plastic blow-molded carrying case for easy transportation, safe storage, and quick organization. Manufactured under carefully controlled conditions allowing for the highest degrees of accuracy when used at a temperature of 68 degrees F.

More information about Grizzly H5608


Similar products



Türlen Test Dial Indicator 7 Jewels High Precision 0.0005" 0-15-0


TÜRLEN 13 - Manufactured under carefully controlled conditions allowing for the highest degrees of accuracy when used at a temperature of 68 degrees F. 7 jewels. Precision ground to close tolerance. Various sizes: this package includes 10 pairs of 1/8-inch x 6-inch 03cm x 15. 2cm parallel bars with the following heights: 1/2-inch, 1-1/8-inch, 1-1/4-inch, 7/8-inch, 1-1/2-inch, 1-inch, 3/4-inch, 1-3/8-inch, 5/8-inch, and 1-5/8-inch; Permanently laser-etched size in standard SAE inches on each parallel; The 2 holes on each individual bar are 4 inches 10.

2cm apart from center to center with the diameter incrementing in 1/8-inch from 1/2-inch to 1-5/8-inch. Built to last: constructed from solid steel that is stress relieved against distortion as well as precision ground and hardened for ultimate strength and longevity; Bars come individually wrapped in pairs and are pre-oiled for a long-lasting life and rust-resistance we recommend reapplying oil after use.

Türlen Test Dial Indicator 7 Jewels High Precision 0.0005" 0-15-0 - Sizes 1, 3, 4 and 5, 2, 60° tip angles. Precise machining: use the abn machinist thin parallel bars 20-piece tool set 1/8" x 6" Inch - Straightedge Bar Blocks - 1/2" to 1-5/8" Block Pairs for any machining, especially smaller workpieces; Use on a jig or drill press for milling work and other projects.

Features: easy to read 1-3/16'' white face with black markings 7 JEWELS Crisp graduations Durable satin chrome finish Graduations: 00005'' per line includes a padded case Used in a milling machine to find the workpiece edge. Professional precision Tool! Easy-to-read 1-3/16" diameter face, 0

More information about TÜRLEN 13


Similar products